answersLogoWhite

0

A draft diverter is a device used in venting systems, particularly for appliances like gas water heaters, furnaces, or boilers. Its primary function is to redirect exhaust gases from the appliance to the outside atmosphere while preventing backdrafts and ensuring proper airflow. By maintaining a balanced pressure, a draft diverter helps improve combustion efficiency and reduces the risk of carbon monoxide buildup. Proper installation and maintenance of a draft diverter are essential for safe and efficient appliance operation.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Continue Learning about Engineering

Why is there water coming out of the tub faucet but not from the shower head?

1- plugged shower head 2- defective diverter


How do you calculate equivalent fresh water draft of a vessel while salt water draft is given?

To calculate the equivalent fresh water draft of a vessel when the saltwater draft is known, you can use the principle of buoyancy and the specific gravities of saltwater and freshwater. The formula is: [ \text{Fresh Water Draft} = \text{Salt Water Draft} \times \frac{\text{Density of Salt Water}}{\text{Density of Fresh Water}} ] Typically, the density of saltwater is about 1.025 g/cm³ and that of freshwater is about 1.000 g/cm³, so the formula simplifies to multiplying the saltwater draft by approximately 1.025.


Is forced draft has negative pressure drop?

No, the forced draft fan has positive pressure as it just forces yhe air into the combustion chamber.only the induced draft fan has negative pressureas it removes the flue gases & exhaust gases is stacked up


What turbine does not require draft tube?

Draft tube is used to increase the pressure from the low turbine exit pressure to the pressure of the surrounding to which the fluid is rejected.Only reaction turbines require a draft tube as there is low pressure at the exit of the turbine,where as in an impulse turbine the pressure at the inlet and the exit is essentially the same, which is above the pressure to which the fluid is rejected and thus it require no draft tube.


What are the steps used in writing a project?

1: Brainstorm 2: Rough Draft 3: Proofread/Revise and Edit 4: Final Draft 5: Share (turn in)

Related Questions

What is the air that is drawn into the draft diverter called?

The air that is drawn into the draft diverter is called combustion air. It is essential for providing oxygen to the burner to support combustion in appliances such as furnaces and water heaters.


What is the purpose of the draft diverter on a gas furnace?

It protects the Pilot Light from being blown out


What is the purpose of a draft diverter on a gas furnace?

It protects the Pilot Light from being blown out


What does the draft diverter do in the case of a downdraft in the flue pipe?

A draft diverter is a device that helps manage airflow in a flue pipe, particularly in the event of a downdraft. When downdraft occurs, it prevents combustion gases from flowing back into the living space by redirecting them safely outside. The diverter helps to maintain proper draft conditions by allowing fresh air to enter, ensuring efficient operation of the appliance and reducing the risk of dangerous backdrafts. Overall, it enhances safety and efficiency in venting systems.


How can I replace a tub diverter?

To replace a tub diverter, you will need to turn off the water supply to the tub, remove the diverter handle and trim plate, unscrew the diverter valve, and install the new diverter valve in its place. Finally, reassemble the handle and trim plate.


Is the diverter leaking in your plumbing system?

Is the diverter leaking in your plumbing system?


How do I go about performing a bathtub diverter replacement?

To perform a bathtub diverter replacement, first turn off the water supply to the bathtub. Remove the diverter handle and plate, then unscrew the diverter valve. Install the new diverter valve and reassemble the handle and plate. Turn the water supply back on and test the diverter to ensure it is working properly.


How can I replace a shower diverter?

To replace a shower diverter, you will need to turn off the water supply to the shower, remove the diverter handle and trim plate, unscrew the old diverter valve, and install the new diverter valve in its place. Finally, reattach the trim plate and handle, and turn the water supply back on to test the new diverter.


Can you change from tub spout diverter to diverter on the control?

NO - you would have to change valve out


How can I fix a shower diverter?

To fix a shower diverter, you can start by turning off the water supply to the shower. Then, remove the diverter handle and the diverter valve. Clean any debris or buildup that may be causing the issue. If the diverter is still not working properly, you may need to replace it with a new one. Finally, reassemble the parts and test the shower to ensure the diverter is functioning correctly.


How can I repair a bathtub spout diverter?

To repair a bathtub spout diverter, you can start by turning off the water supply to the bathtub. Then, remove the diverter handle and the diverter valve. Inspect them for any damage or debris that may be causing the issue. Clean or replace any damaged parts, and then reassemble the diverter. Turn the water supply back on and test the diverter to ensure it is working properly.


How can I repair a shower tub diverter?

To repair a shower tub diverter, you can start by turning off the water supply to the shower. Next, remove the diverter handle and the diverter valve. Inspect them for any damage or wear and tear. If necessary, replace the diverter valve or any damaged parts. Reassemble the diverter and test it to ensure it is working properly. If the issue persists, consider seeking professional help.