It depends on the type of engine, but its generally one of a few things. A turbofan like on a commercial plane have the bypass, or large amounts of air flowing close to the out side of the engine. A higher temperature engine may have a heat exchanger on the turbine blades that actuall takes cooler air and passes it over the vanes so they don't melt. Almost every turbine engine has some sort of oil cooler to help keep the moving parts from getting too hot. With many turbines the idea is to more or less protect the engine from heat than to cool it down. More heat with a turbine means more power.
RADITOR * Small generators either air cooled or water cooled 2 stroke. Autos are mainly 4 stroke and the majority watercooled.
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
My dadd uses turbine to heat the gas of hiss engine after he stopped at the gas stop and didn't find any gas left. ( This may be a weird looking sentence for turbine,but at least I got an A on it. )
Ratchet mechanisms used in Gas power plant for Gas Turbine. (like Barring gear in steam turbine).
bronze
gas turbine generator
S. N. Rosenwasser has written: 'Gas-turbine and advanced-HTGR materials screening test program' -- subject(s): Materials, Gas-turbines, Gas cooled reactors
The combustion chamber of a gas turbine engine is the place where the fuel-air mixture undergoes combustion - it burns. 4/16/09- ( D ) Gases are cooled to a desired temperature. ====================================================== Allow me to add to this: yup it's Gases are cooled to a desired temperature. <page 88 in you Penn Foster Heat book>
A gas turbine is one type of power plant. It produces power by burning gas to turn the turbine.
RADITOR * Small generators either air cooled or water cooled 2 stroke. Autos are mainly 4 stroke and the majority watercooled.
Gas Turbine Research Establishment was created in 1959.
The function of IGV in a gas turbine is to prevent surges and stall conditions.
The first gas turbine in the Gulf started working in the 1970s
Gas turbine power generators are used in two basic configurations. Simple Systems consisting of the gas turbine driving an electrical power generator. You fill them with gas carefully & turn them in.
A diagram of an impulse turbine is in related links.
Westinghouse Aviation Gas Turbine Division was created in 1945.
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.