MHO distance relays are used to protect andÊdetect faults and the location of faults on a transmission line. It detects faults by measuring and comparing phase angles through a phase comparator.
as it is most affected by arc resistance....
i dont know but it has 10 letters :) im doing a crossword for science and they asked that question but I cant figure it out this is halohayd the answer is hardness
ohm (ōm)n. A unit of electrical resistance equal to that of a conductor in which a current of one ampere is produced by a potential of one volt across its terminals.mho (mō)The SI derived unit of electrical conductance, equal to one ampere per volt. It is equivalent to the reciprocal of the ohm unit. Also called siemens.AnswerThe mho is an obsolete unit of measurement for conductance, which is the reciprocal of resistance. It has been replaced, in SI, by the siemens (symbol: S).
The current [I] (measured in Amps) is equal to the power [P] (measured in Watts) divided by the voltage [V] (in Volts). I = P/V Amps = Watts / Volts Therefore, P*V=I Watts * Volts = Amps
MHO is a formerly used unit which was used to measure electrical conductance.
mkjj
First of all, the correct spelling is 'siemens' (symbol: S), which is the SI unit of measurement for conductance -the reciprocal of resistance. The mho is simply an obsolete unit for conductance, and is exactly equivalent to the siemens.
OFFSET IMPEDANCE RELAYOffset impedance relay is also known under names ADMITTANCE RELAY or MHO RELAY
it measure the hardness of material.
The correct spelling is siemens, and it is the SI unit for conductance -the reciprocal of resistance. The mho is simply an obsolete unit for the same thing, and is numerically equal to the siemens.
no jade is like an emerald and agate is more like the ruby NO !!!!!!! MHO- scale is the same for both stone though some time in formation jade well be a 6.8 - 6.9 / as agate is a hard 7.0 MHO-scale. Emerald & ruby ...... 8.5 MHO - scale Sorry that this answer was ......Blank in wrong
Bhala ka sa buhay mho..bkit qoh nmn sa2bhin ed nlaman mho.,..tanga mulala berat baliw nga nga
tanong mho sknya
MHO distance relays are used to protect andÊdetect faults and the location of faults on a transmission line. It detects faults by measuring and comparing phase angles through a phase comparator.
The mho is an obsolete unit of measurement for conductance, which has been replaced by the siemens(symbol: S), in SI. Conductance is the reciprocal of resistance, so 300 S, is exactly the same as 1/300, or 3.33 milliohms.
as it is most affected by arc resistance....