answersLogoWhite

0

A place to hang the line.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

What does plumbed mean?

In a vertical or perpendicular line. e.g. "The wall is plumb."This is the most common meaning and alludes to the method of establishing vertical by using a plumb bob - a weight suspended from a long line which hangs straight down - with the resulting line between the top of the line and the plumb bob being a reference for the edge of something that is supposed to be perfectly vertical. If it is further away from the line at the top or bottom of the line than it is at the other end, it is not quite "plumb".There are, of course, several more informal uses for the term:(Informal definition) Directly; squarely: e.g. "It fell plumb in the middle."(sometimes also spelled as "plum" with the informal definition...) Utterly; completely: e.g "I'm plumb worn out."informal chiefly US (intensifier): e.g. "That's just plumb stupid."


How do you use an engineers precision level?

If you mean a 'spirit level' then when the line is in the center of the bubble then the object being measured is horizontal to the ground.


You have two water heaters hook two the same feed line will both produce hot water Or will one over ride the other?

They will work co-dependently.


How far apart do you lay sewer line and water line?

well in the upc code it says to be 1 foot away horizontal and 1 foot away vertical up or below either pipe. For mains in the street most engineers like to have a separation of 3 or more feet.


Where did the term spring line for pipe come from?

The term "spring line" for pipe refers to the horizontal line that marks the point where a pipe is neither fully submerged nor fully above water in a fluid system, typically in a trench or a cut. It is derived from the concept of "spring," indicating the natural level of groundwater or liquid that exerts pressure on the pipe. The spring line is crucial for assessing buoyancy and structural integrity, as it represents the transition zone where hydrostatic pressure impacts the pipe. Understanding this line helps engineers design and install piping systems effectively.

Related Questions

Who invented the plumb line?

It is not known who invented the plumb-line or plumb-bob; there is evidence that it has been in use since biblical times and archaeologists haveÊunearthed what they think are plumb gaugingÊtoolsÊin Ancient Egypt.


How do they know the plumb line is vertical?

Use of a plumb bob a level used on plumb rather then horizontal


How do you draw a vertical line?

Use a plumb line.


What is plumb line test?

Plumb line testThis is a quick visual check to see if the spine is straight. In scoliosis, the plumb line will fall to the left or right of the spine instead of through the middle of the buttocks. Plumb line dropped from the prominent vertebra of C7 (vertebra prominence) measures the decompensation of the thorax over the pelvis. The distance from the vertical plumb line to the gluteal cleft is measured in centimeter and is recorded along with the direction of deviation. If there is cervical or cervico-thoracic curve, the plumb should fall from the occipital protuberance (inion).


What does the plum line look like?

The plumb line is a vertical straight line.


How do you spell plum as in vertically straight?

You're referring to the word 'plumb' - as in plumb line.


What did plumb-lines used to be made from?

Plumb-lines were traditionally made from materials such as lead, brass, or iron. These materials were chosen for their density and durability, allowing the plumb-line to hang straight and true for accurate measurements.


Did david use plumb line to measure moabites to kill?

II Samuel 8:2 is the account that you are referring to, but the mention of a plumb-line is not in this passage. The only passage in scripture that mentions a plumb-line is in Amos 7:7-8. A plumb-line is used for vertical alignment. David used a chord , or rope as a measuring tool to separate out a third to one half of the Moabites.


What is plumb bob use for?

A plumb bob is a weighted instrument used in construction and carpentry to create a vertical reference line. It helps ensure that structures are built accurately and in alignment with a true vertical.


What does plumb?

In a vertical or perpendicular line. e.g. "The wall is plumb."This is the most common meaning and alludes to the method of establishing vertical by using a plumb bob - a weight suspended from a long line which hangs straight down - with the resulting line between the top of the line and the plumb bob being a reference for the edge of something that is supposed to be perfectly vertical. If it is further away from the line at the top or bottom of the line than it is at the other end, it is not quite "plumb".There are, of course, several more informal uses for the term:(Informal definition) Directly; squarely: e.g. "It fell plumb in the middle."(sometimes also spelled as "plum" with the informal definition...) Utterly; completely: e.g "I'm plumb worn out."informal chiefly US (intensifier): e.g. "That's just plumb stupid."


What is the purpose of the plumb bob?

To show a vertical line


What is a level called if it is vertical?

A line 90 degrees from horizontal is a plumb line.