Yes, an open in main line of a parallel circuit will effect the entire circuit current and make the whole circuit current zero
To compan
Double circuits can carry more power. Also, double circuits introduce a level of redundancy, so that if a single circuit (half of the double circuit) fails, the other half is still intact.
Any devices that are added to a circuit and need the full line voltage to operate, are added in parallel to any other load devices or fixtures in the circuit.
A load line is used in graphical analysis of nonlinear electronic circuits, representing the constraint other parts of the circuit place on a non-linear device, like a diode or transistor. It is usually drawn on a graph of the current vs the voltage in the nonlinear device, called the device's characteristic curve. A load line, usually a straight line, represents the response of a linear circuit connected to the nonlinear device in question. The operating point(s) of the circuit are the points where the characteristic curve and the load line intersect; at these points the current and voltage parameters of both parts of the circuit match
IPLC stands for international private leased circuit IPLC stands for international private leased circuit
Private line modems worked exclusively with voice and data private lines
Double Circuit Double Circuit String Transmission Line
Private Line - album - was created on 1991-10-15.
Yes, an open in main line of a parallel circuit will effect the entire circuit current and make the whole circuit current zero
If the break is in either the feeder or return line, the circuit will become open and the circuit will cease to function.
yes
yes
A private telephone line can be signed up for by contacting your telephone service provider. It will cost more money then what is paid for a public line.
it is the natural commutation ...by making open circuit or short circuit on the thyristor to make it turn off.
It depends what circuit you are making.Circuit breakers come in different 'ratings' and so are chosen according to the power demands of the circuit you have.You don't choose a circuit for a circuit breaker as such, you choose a circuit breaker according to what circuit you have made.
Short Circuit.