0
A pulley is a simple machine consisting of a wheel on an axle or shaft designed to support movement and change the direction of force. It works by allowing a rope or cable to run along the groove of the wheel, enabling the user to lift heavy loads with less effort. By using multiple pulleys in combination, known as a block and tackle, the mechanical advantage can be increased, further reducing the force needed to lift the load. This mechanism is widely used in various applications, from construction to transportation.
What else can I help you with?
How does a well pulley work?
It works much more effectively, and with greater dedication, focus, and commitment, than an ailing pulley does.
How do lifts and elevators work?
The cabin of the lift is raised (and lowered) by a pulley. The pulley has a counterweight, which weighs as much as an empty cabin. Therefore, the wheel at the top of pulley does not need to lift the entire weight of the cabin - just the extra load in the cabin.
How does a lift work?
The pulley in the mechanical device work together to make the lift move up and down. Counter weights.
When was the pulley invented?
The block and tackle (or pulley system) was brought to us by Archimedes (287BC - 212BC) in Greece, but neither Archimedes, nor any who wrote about him and his extraordinary work dated the invention.stupid answer
IN a real pulley system the work supplied must be?
In a real pulley system, the work supplied must overcome both the gravitational force acting on the load and the frictional forces present in the system. Due to these factors, the actual work output is always less than the work input, which means that some energy is lost as heat due to friction. Therefore, the efficiency of the pulley system is determined by how much of the input work is converted into useful work lifting the load. It's essential to account for these losses when calculating the mechanical advantage and effectiveness of the system.
What is the formula for the percent efficiency of a pulley?
The formula for the percent efficiency of a pulley is (output work/input work) x 100%. It compares the output work (work done by the pulley) to the input work (work done on the pulley) to determine how efficient the pulley system is in transferring energy.
What is the function of pulley?
Pulley reduces the force given to get the work done. There are amny types of pulleys. Examples are fixed pulley, movable pulley and Combined pulley.
A person does 50j of work to lift a crate using a pulley. the pulley's work output is 42j. What is the pully's mechanical efficiency?
The mechanical efficiency of the pulley is calculated as: (Work output / Work input) * 100%. In this case, it would be (42J / 50J) * 100% = 84%. The pulley is 84% efficient at converting input work into output work.
How does the work you get out of a pulley compare with the work you put into it?
The WORK is the same. Work = force times distance. If the pulley allows you to pull half as hard, you will have to pull over twice the distance (length of rope), making the same total work. (Ignoring friction; you would actually have to do slightly more work to overcome the friction in the pulley.)
Can your car work with a malfunctioning idler pulley?
The Answer is no.
Do pulleys make you work less?
No. If you are, say, lifting a weight the amount of work done is the same whether you use a pulley or not. However, you may not be able to actually lift the weight unless you use a pulley. But the amount of work done will be the same with or without the pulley.
What are the differences between a fixed pulley and a moving pulley and how do each of them change work?
The difference between a fixed pulley and a movable pulley is, the wheel of a fixed pulley does not move because the wheel is attached to a wall, ceiling, or other object. Unlike a fixed pulley, a movable pulley's wheel does move. The wheel on a movable pulley is not attached to a wall or other object. A fixed pulley changes work by changing the direction of a force. A movable pulley changes work by reducing the input force needed to lift heavy objects. A movable pulley changes the direction of the input force and reduced it. A movable pulley also increases the output force.
The pulley for the serpentine belt sheared off. I have a new pulley and need to know how many washers should be on the front and behind the pulley to work properly?
It shaves a belt.
Does a pulley use friction?
No, a pulley does not use friction. Pulleys are simple machines that use a wheel and axle to redirect the force applied to them. Friction is not necessary for a pulley to work properly.
How does a well pulley work?
It works much more effectively, and with greater dedication, focus, and commitment, than an ailing pulley does.
How pulley systems work?
Ropes or cables run around pulleys and each pulley wheel reduces the pulling effort.
How do roped elevators work?
pulley system, much like the cabled elevators work.
