Designer mostly drafting, piping engineer mostly calculation
Process piping contains the product or piping integral to the process of creating the product. Utility piping is supporting the process but is not integral to the process, typically fresh water, cooling water, steam, condensate
that is function of anode and cathode in underground piping yes
piping critical , non critical critical piping : where temperature ,pressure are high and sizes of pipe are big and piping connected to critical equipment( such pump,turbine compressor etc) non critical : other than criti
A bobbin or a Spool
A pipe spool refers to a prefabricated section of a piping system. This includes the pipe, fittings and flanges that are pre-assembled. They are pre assembled because this can be done in a controlled environment.
The term "pipe spool" or "spool piece" refers to a prefabricated section of a piping system that includes the pipe, fittings and flanges that are pre-assembled in the fabrication facility and then transported to the field. The reason for pre-assembly is that hoists, gauges, material and tools are available for the assembly in a controlled environment. The size of the spool pieces is limited by factors related to transportation to the site and ability to handle the spool piece at the site during assembly.
Spool pins are used on sewing machines to hold the spool of thread. Most or vertical, some that are horizontal use a spool cap to secure the spool of thread. Some machine come with spool nets to cover the spool to ensure the thread enter the machine evenly. Some machines come with an extra spool pin that fits into a small hole on the top of the machine to hold a second spool of thread.
A spool of thread is very cheap. Spools of thread can be as cheap as a dollar or less a spool.
That spool is just the right size for my project.
A real reel is a genuine spool.
Emma Spool was created in 1982.
To wind a Ryobi weed wacker spool, first remove the spool from the trimmer. Then, wind the trimmer line around the spool in the direction indicated on the spool. Make sure to evenly distribute the line and avoid overlapping. Finally, reattach the spool to the trimmer and you're ready to use it.
If you are talking about a diff. A mini spool replaces the planetary gears in the diff centre. A full spool replaces the whole centre except the crown wheel.
To change the spool on an RTE 115 trimmer, first, ensure the trimmer is turned off and unplugged for safety. Remove the old spool by pressing the release tabs on the spool cover and lifting it off. Then, insert a new spool by aligning it with the spool holder and ensuring the line feeds through the eyelets. Finally, replace the spool cover securely, and the trimmer is ready for use.
What the difference between process piping and power piping?
a spoolcase is something that you use in sewing or when you sew you put the spool into a spoolcase but you must make sure the spool is filled up with thread then you can start sewing only if you have a long piece of thread in the spool!!