A vacuum tube with three electrodes is commonly known as a triode. It consists of a cathode, an anode, and a control grid, allowing it to amplify electrical signals. The control grid modulates the flow of electrons from the cathode to the anode, enabling the triode to function as an amplifier or a switch in various electronic applications. Triodes were essential in early electronics but have largely been replaced by transistors in modern circuits.
2 states
It means that the glass envelope has leaked and is no longer a vacuum. Air inside has oxidized the getter. They generally no longer work in this condition.
when the vacuum sucks up things it goes through the tube and into the bag ...Unless you are talking about electronics, then a vacuum tube is used to form an amplifying circuit. Some tubes can emit cathode rays onto a screen (Cathode Ray Tube = CRT) to display a picture and some can function as diodes to regulate current flow.
an electron tube containing a near-vacuum that allows the free passage of electric current.
forward bias is in the direction a junction or vacuum tube wants to conduct currentreverse bias is in the direction a junction or vacuum tube opposes conducting current
Triode
In 1907 American inventor Lee De Forest invented the three-electrode vacuum tube
In 1907 American inventor Lee De Forest invented the three-electrode vacuum tube
A closed vessel having electrodes at either end and containing agas at low pressure. When a sufficient voltage is applied to theelectrodes, an electric current flows through the gas. Dischargetubes can be used to prevent current flow below a certainvoltage; they can also function as lamps by the use of ionizinggas, which glows when current flows through the tube.
Valve amps, also known as tube amps, use vacuum tubes to amplify audio signals. The vacuum tubes amplify the signal by controlling the flow of electrons between electrodes inside the tube. The amplified signal is then sent to the speaker for output.
An audion was an early variety of electronic amplifying tube consisting of a partially evacuated glass tube with three electrodes, a heated filament, a grid and a plate.
the vacuum tube
A triode is a vacuum-tube (US) aka valve(UK) with three electrodes : an anode, a cathode and a grid. The cathode is heated electrically which boils off a cloud of electrons. The anode is made positive ( typ. 100-500V) which attracts the electrons towards it. The grid is an open structure, usually of thin wires, placed between the anode and cathode, but nearer the cathode. If a negative voltage is applied to the grid the current flow through the tube is reduced. The more negative, the less current. Prior to the development of transistors, tubes were used for all things in radio,TV and electronics. Different tubes had different numbers of electrodes; the triode was particularly suited to high power amplifiers, especially at radio frequencies. Triodes are still used today by shortwave radio stations, and for RF heating equipment.
A vacuum tube is an electronic component that was used in early electronics to control the flow of electrical current. It consists of an evacuated glass enclosure containing electrodes such as a cathode, anode, and grid. Vacuum tubes were widely used in early radios, televisions, and computers before being largely replaced by semiconductors.
There are three electrodes: cathode (filament) grid and anode. The "third" will be the one you do not already know the name of.
A vacuum tube is simply a tube with no oxygen nor carbon dioxide in it (aka no air).
Millman's theorem