0
It is a variable or a component of a variable.
What else can I help you with?
What is digital electronic?
Digital Electronics deals with logic 1 and logic 0, where logic 1 is represented by one voltage and logic is represented by another voltage.(ie. it is a discrete representaiton of analog signals). The main advantage of digital signals over analog signal is that it is less prone to noise.
What is the difference between OR diagram and OR circuit?
OR diagram is a drawing or plan of the digital logic OR function, it is not able to actually do anything only tell a person something about this logic functionOR circuit is the actual electronics implementing the digital logic OR function, it is actually able to carry out this logic function in a digital device or system
What is the name for the CO output frequency that correspond with logic 1 in the digital data?
The output frequency corresponding to logic 1 in digital data is typically referred to as the "high frequency" or "logic high frequency." In digital circuits, this frequency represents the signal level that indicates a binary 1. The specific frequency can vary depending on the design and application of the digital system.
Limitation of logic converter in analyzing digital circuit?
The answer is C.
What is logic for ground in digital electronics?
In some types of electronic design you may have Digital circuits also called Logic Circuits and Analog circuits. Each circuit may have separate power and ground lines. So you may see the notation on a schematic for Logic Ground or Analog ground.
What products use logic gates?
All digital electronic circuits are composed of logic gates. Without logic gates there would be no digital electronics.
Which logic is used by odd parity generators?
Digital Logic
What is meant by accumulator in digital logic?
An accumulator is a register where arithmetic and logic operations are performed and their results stored (accumulated). Usually one operand was already stored in the accumulator while the other came from memory, the immediate value field of an instruction, or if the computer has them another register.Many early computers had only one accumulator and a small number of index registers. On such machines the accumulator register itself is the ALU, it has all the special circuits inside itself to perform those operations and modify its own contents. The flipflops that store the data in an accumulator are usually JK-flipflops, which simplify the design of those special circuits.Later when computers began to use multiple general purpose registers the concept of the accumulator fell out of favor. On such machines one separate ALU was shared with all the registers, which were reduced to just a small bank of very high speed RAM with no special circuits like accumulators usually have.
What are the basic digital logic gates?
And,or,not
What are registers that are designed to store the results of logic operations?
The register that stores the result of (an arithmetic) or logical result is the accumulator.
What is an accumulator in microprocessor?
the accumulator is an 8-bit register then is part of the arithmetic/logic unit(ALU). this register is used to store to store 8-bit data and to perform arithmetic & logical operation. the result of an operation is stored in the accumulator. the accumulator is also identified as register A.
What is digital electronic?
Digital Electronics deals with logic 1 and logic 0, where logic 1 is represented by one voltage and logic is represented by another voltage.(ie. it is a discrete representaiton of analog signals). The main advantage of digital signals over analog signal is that it is less prone to noise.
What is the difference between OR diagram and OR circuit?
OR diagram is a drawing or plan of the digital logic OR function, it is not able to actually do anything only tell a person something about this logic functionOR circuit is the actual electronics implementing the digital logic OR function, it is actually able to carry out this logic function in a digital device or system
What is the conclusion of logic gate during seminar?
A logic gate is used to implement any digital logic. It may be AND, OR, XOR, NOT, XNOR, NAND, NOR. These logic gates can be used to implement the output equations of digital circuits in order to design them.
What is a ribbon spool?
it is a signal of digital logic
What has the author M Morris Mano written?
M. Morris Mano has written: 'Logic and Computer Design Fundamentals' -- subject(s): Electronic digital computers, Circuits, Logic circuits, Logic design, Problems, exercises 'Logica Digital y Diseo de Computadores' 'Digital logic and computer design' -- subject(s): Electronic digital computers, Logic circuits, Logic design, Digital integrated circuits, Computer, Logische Schaltung 'Computer system architecture, third edition' -- subject(s): Computer architecture 'Computer system architecture' -- subject(s): Computer architecture 'Arquitectura de Computadoras' 'Digital design' -- subject(s): Electronic digital computers, Circuits, Logic circuits, Logic design, Digital integrated circuits
Why do you learn number system in digital logic?
One of the biggest applications of digital logic is using circuits to perform arithmetical operations. While theoretically, any number system could be used, binary is the most simple to express in terms of digital logic circuits.
