answersLogoWhite

0

The ports of the angle valve ( Inlet and outlet) are oriented at an angle 90 deg.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Engineering

How do you change a angle valve?

By shutting off the water supply prior to this valve of course


The valve seat performs two functions It provides a seal for the valve in the combustion chamber and it provides a cool surface to carry heat away from the valve. Most valves use degree seating angle?

The valve seat is crucial in engine performance, serving both to seal the valve effectively against the combustion chamber and to act as a heat sink that dissipates heat from the valve. Most valves feature a degree seating angle, which ensures a proper fit and optimal sealing when closed. This design helps maintain engine efficiency and longevity by preventing leaks and managing heat transfer effectively. Overall, the valve seat's dual role is essential for the reliable operation of an internal combustion engine.


Why should use globe valve in bypass line of control valve?

The purpose of the bypass and the globe valve would depend on the function of the system. The bypass might be used to allow a small amount of flow around the control valve to warm or purge the line prior to startup, or it might be there as a failsafe to prevent inadvertent total shutoff of the line by the control valve. In any case, a globe valve in the bypass line provides adjustability along with the ability to shutoff the bypass flow and Globe valve has following advantages. 1.Good shutoff capability 2. Moderate to good throttling capability 3. Shorter stroke (compared to a gate valve) 4. Available in tee, wye, and angle patterns, each offering unique capabilities 5. Easy to machine or resurface the seats 6. With disc not attached to the stem, valve can be used as a stop-check valve.


What is the triscuspid valve?

the triscuspid valve is the valve in a bathroom sink.


What is the difference between a control valve and a gate valve in a stand pipe system?

a gate valve is a one way totally open or closed valve, a control valve is a variable valve.

Related Questions

What is a three angle valve job?

The area where a valve closes in the combustion chamber of a four-stroke engine is called the valve seat. During a valve job, this seat is ground at a set angle, usually 45 degrees, for a good seal. In a three-angle valve job, additional angles are ground into each side of the seat angle to ease the transition and improve flow.


What is the purpose of using the angle valve?

where the process require the fluide to be leave at right angleto the direction in which it enters at that time we use angle valve


How do you change a angle valve?

By shutting off the water supply prior to this valve of course


What is the function of an angle valve?

To regulate the flow of a liquid or gas.


What is the valve angle on a VW aircooled bug?

The valve angle on a Volkswagen air-cooled Beetle (bug) is typically 45 degrees. This angle refers to the relationship between the valve seats and the cylinder head. It is a key factor in the engine's breathing efficiency and performance characteristics. Variations may exist in different engine models, but 45 degrees is standard for most Beetles.


How many degree are in a engine valve?

Valve degrees vary accouding to the manufacturer of the engine. Specs are givien for each engine in a manual that displays valve timeing and valve degree of angle. This is importan because the valve angle must match the head angle already cut into the head by the manufacturer. I have seen everything from 12 degrees to 45 degrees and sometimes multiple degrees. It is according as to what you want the valve to do. More top end speed, less top end speed double fire, tripple fire, advance and retard mechanisms and other factors.


What is valve angle?

www.chevyhiperformance.com/techarticles/89678_valve_angles/index.html You should have a good understand with this.


What is the purpose of an angle valve for a sink and how does it contribute to the overall functionality of the sink?

An angle valve for a sink is used to control the flow of water to the faucet. It is typically installed under the sink and allows for easy shut-off of water supply in case of maintenance or repairs. The angle valve contributes to the overall functionality of the sink by providing a convenient way to regulate water flow and prevent leaks or water damage.


What is the seat angle of a valve?

Where the easher sits Different engine manufactures use different spec's for their valve angles. There is so much criteria used to determine that angle, it would fill a book. That's why they are called engineer's and we are called grease monkeys.


Can an angle stop control water flow pressure?

An angle stop is not intended to control water pressure for most applications. That being said, however, you can control the pressure with an angle stop valve (Aka angle pattern globe valve) while there is flow. As soon as the flow stops, then the pressure will equalise throughout the system. I would suggest using a PRV or pressure reducing valve. This will control water pressure under most all conditions. Source: 2nd year plumber training, Alberta


What is the purpose of an angle stop valve for a toilet and how does it function in the plumbing system?

An angle stop valve for a toilet is used to control the flow of water to the toilet. It is typically located behind the toilet and connects the water supply line to the toilet tank. The valve can be turned on or off to stop or allow water flow to the toilet. This is important for maintenance, repairs, and emergencies.


How do you change angle valve for toilet?

Shut off valve at the wall? Turn the main water line off and change it. How you change it would depend on what type it is and how it attaches to the pipe.