bridge expansion is when one side of the bridge needs to be propped up
Cable stay. Yes, this is a cable stayed bridge. I actually sold the expansion joints (Waboflex SR4) for this bridge! It is a very impressive bridge.
The longest expansion bridge in the world is the Akashi Kaiky Bridge. It spans 1,991 meters and is located in Japan.
Buckling; shriveling, bending, or curling from heating or pressure. (heating, in this case)
All materials expand when heated and contract when cooled. Bridges are especially vulnerable because the entire bridge is surrounded by air, and it doesn't have the ground below to act as a heat sink. Without the expansion slots, the bridge would run the risk of buckling when heating, and pulling apart when cooling. This could damage a bridge. Uncontrolled or unsupported cracks, for example in the middle of a span could be very dangerous.
They are the one who sends data to the processor... The north bridge also the who controls video card,expansion cards or graphics cards and south bridge controls the drives and onboard devices.
A bridge must have expansion gaps or else they will waver when they expand in warm temperatures. This is thermal expansion
If there is no expansion joints on a bridge and if it's really hot the molecules of the bridge will be separated slowly and the bridge will collapse
102.8
to allow for expansion and contraction
The purpose of an expansion joint on a bridge it to permit the components to expand and contract with changing temperatures without stressing the entire bridge structure. Early bridge failure would be the result of building a modern bridge without expansion joints.
No. An expansion bus always connects to South Bridge. http://www.wisegeek.com/what-is-southbridge.htm
Thermal expansion means that the length of the bridge changes.
Cable stay. Yes, this is a cable stayed bridge. I actually sold the expansion joints (Waboflex SR4) for this bridge! It is a very impressive bridge.
The longest expansion bridge in the world is the Akashi Kaiky Bridge. It spans 1,991 meters and is located in Japan.
expansion slots are the slots that are located on the mother boards of the computer and at the left side of the south bridge.
If you mean a small gap between two parts of the bridge, these are normally to allow for expansion during hot weather.
Thermal expansion and contraction can put huge stresses into a large structure such as a bridge. To minimise this effect, the rollers are designed to allow the end of the bridge to move with the expansion and contraction.