answersLogoWhite

0

The bed length of a lathe is the total length of the bed way from where it starts to (close to the headstock) to where it ends.

When a lathe is advertized for sale it would show for example: 200mm x 1000mm or 8" x 40". The 200mm or 8" describes the "swing" of the machine and the 1000mm or 40" describes the workable distance between the chuck and center. This should not be confused with the bed size of a lathe as the bed houses the tail stock and therefore the distance is shortened.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Engineering

How a lathe machine is specified?

A lathe machine is specified by-1.The maximum diameter of the workpiece that can be operated on the machine.2.The distance between the headstock and the tail-stock of the machine.3.The length of bed of the machine.


What is bench lathe machine?

(mechanical engineering) A small engine or toolroom lathe suitable for attachment to a workbench; bed length usually does not exceed 6 feet (1.8 meters) and workpieces are generally small.Read more: bench-lathe-mechanical-engineering


What is the size of a lathe that measures 6in from the center of the spindle to the main bed?

A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.


What is a gap bed lathe?

The bed of a lathe is the central beam that runs down the machine. The head, which holds and turns the workpiece, is fixed at one end, there is a tailstock at the other end which can be adjusted along the bed, and usually a carraige in between, which holds turning tools. The workpiece that can be turned in the lathe is limited to what will fit in the head without hitting the bed. A gap bed lathe has a gap in the bed near the head, so a larger workpiece can be turned.


How do you specify lathe?

The lathe is Specified on the basis on the following factors: 1.Lathe swing or simply swing i.e maximum diameter of the workpiece that can be machined. 2.Maximum distance between the HEadstock and tailstock. 3.Length of the bed. then there are many kinds of lathe categorized by their specific functions or mechanisms but these are the general specifications for every lathe.

Related Questions

What is bed in lathe?

The bed length of a lathe is the total length of the bed way from where it starts to (close to the headstock) to where it ends. When a lathe is advertized for sale it would show for example: 200mm x 1000mm or 8" x 40". The 200mm or 8" describes the "swing" of the machine and the 1000mm or 40" describes the workable distance between the chuck and center. This should not be confused with the bed size of a lathe as the bed houses the tail stock and therefore the distance is shortened.


How a lathe machine is specified?

A lathe machine is specified by-1.The maximum diameter of the workpiece that can be operated on the machine.2.The distance between the headstock and the tail-stock of the machine.3.The length of bed of the machine.


What is the advantage of gap bed lathe?

A gap bed lathe features a removable section in the bed, allowing for the machining of larger workpieces that wouldn't fit within the standard bed length. This increased versatility makes it ideal for various applications, such as turning large diameters or handling irregularly shaped materials. Additionally, it retains the precision and stability of a conventional lathe, providing both flexibility and accuracy in machining operations.


What is bench lathe machine?

(mechanical engineering) A small engine or toolroom lathe suitable for attachment to a workbench; bed length usually does not exceed 6 feet (1.8 meters) and workpieces are generally small.Read more: bench-lathe-mechanical-engineering


How do you determine the size of lathe?

the size of a lathe can be described by either of the following ways. 1.DISTANCE BETWEEN THE TWO DEAD CENTERS. 2.SWING RADIUS. IT'S THE DISTANCE MEASURED FROM THE SADDLE/CARRIAGE TO THE AXIS OF THE SPINDLE.


What is the size of a lathe that measures 6in from the center of the spindle to the main bed?

A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.


What is a gap bed lathe?

The bed of a lathe is the central beam that runs down the machine. The head, which holds and turns the workpiece, is fixed at one end, there is a tailstock at the other end which can be adjusted along the bed, and usually a carraige in between, which holds turning tools. The workpiece that can be turned in the lathe is limited to what will fit in the head without hitting the bed. A gap bed lathe has a gap in the bed near the head, so a larger workpiece can be turned.


How do you specify lathe?

The lathe is Specified on the basis on the following factors: 1.Lathe swing or simply swing i.e maximum diameter of the workpiece that can be machined. 2.Maximum distance between the HEadstock and tailstock. 3.Length of the bed. then there are many kinds of lathe categorized by their specific functions or mechanisms but these are the general specifications for every lathe.


How do you modify a lathe if the job is more than the swing bed size?

The swing of a lathe can be increased if the gap-bed section is removed, providing the lathe has this option and the workpiece is not longer than the gap when clamped in the chuck.


What is a lathe bed?

The bed of a lathe is the central beam that runs down the machine. The head, which holds and turns the workpiece, is fixed at one end, there is a tailstock at the other end which can be adjusted along the bed, and usually a carraige in between, which holds turning tools. The workpiece that can be turned in the lathe is limited to what will fit in the head without hitting the bed. A gap bed lathe has a gap in the bed near the head, so a larger workpiece can be turned.


What two factors are used to determine the size of a lathe?

The two factors that determine the size of a lathe are the "swing" and "distance between centers". The swing of a lathe is the length measured from the center of the hollow spindle or chuck to the nearest part of the bed multiplied by two. Distance between centers is the distance measured between the chuck and tail stock.


How do you cast lathe bed?

Casting a lathe bed involves creating a mold, often made from sand or metal, to shape the molten material, typically cast iron or steel. First, the mold is designed to include the precise dimensions and features of the lathe bed. Once the mold is prepared, molten metal is poured into it and allowed to cool and solidify. After cooling, the mold is removed, and the cast lathe bed is finished through machining to achieve the necessary tolerances and surface quality.