In electrical terms a three phase compressor is a compressor that is driven with a three phase motor. There are compressors that have three pressure heads. The three heads boost the pressure up in higher increments but these are referred to as three stage compressors.
Single phase power from a L-L voltage of 208 volts is calc'd: P = V(phase to phase) * I (individual phase current) / sqrt(3) Total power from all three legs is the above P * 3. P is in watts; continuous sampling will result in watt hour measurements; 1000 x this is kWh's.
In indicator there is a led light source. It gives us the presence of the current source by indicate its light. If the phase of the indicator is not equal to the supply voltage then it can not give us the presence of current source by its led light off. If the phase of indicator is equal with the mane supply phase then its remaining bright and continuous gives us the indication of current source.ANSWER'Phase sequence' is the order, or sequence, in which each of the line voltages of a three-phase system reach their peak values. If 'normal' phase sequence is considered to be A-B-C (or R-S-T, etc.), then 'reverse phase sequence' would be A-C-B. Phase sequence is very important if, for example, you want to ensure that your three-phase motors rotate in the correct direction. So, after disconnecting them for maintenance, you can confirm the phase sequence of your incoming conductors by using a phase-sequence meter, before you reconnect that motor.
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
single phase, double phase & three phase
The answer is telophase.
A solid sol is a colloid where the continuous phase and the disperse phase are solids. An example of a solid sol is a pearl. A colloid is a dispersion of particles of one substance throughout another. The dispersed substance is called the disperse phase and the substance it is dispersed in is called the disperse phase.
the component in which the dispersed phase is suspended is called dispersing medium
Opalescent is a system or material having a small opacity formed from a higly disperse phase.
Instituting continuous improvement strategy is a common BPR phase that includes ongoing improvement and measurement of new processes and systems.
The phase characterized by continuous situational awareness and preparedness is often referred to as the "preparedness phase." In this phase, individuals, organizations, or communities actively assess potential risks and vulnerabilities, develop response strategies, and conduct training and exercises. This proactive approach ensures readiness to respond effectively to emergencies or crises when they arise. Continuous monitoring and evaluation of the situation are key components of this phase.
sometimes when we are drilling we need to use drilling fluid which are mixture of two phase like oil and gas or water and oil. In such case the fluid which is running outside is known as continuous phase of drilling fluid.
SOLID
The Implementation Phase requires continuous reassessment because management wants to work out all of the kinks. They check systems and processes during this phase.
The Implementation Phase requires continuous reassessment because management wants to work out all of the kinks. They check systems and processes during this phase.
The Implementation Phase requires continuous reassessment because management wants to work out all of the kinks. They check systems and processes during this phase.
When something dissolves, it undergoes a phase change from solid to liquid. The particles of the solute separate and disperse evenly throughout the solvent, forming a homogeneous mixture.