A unidirectional current controller device is a type of electrical on/off switch. In order for an item to work that is plugged into a particular outlet, the switch must be in the on position. It is like having lamps plugged into outlets that are controlled by only one switch.
Because it is controlled by the gate current
The On/OFF action in UJT is controlled by emitter current
It is modeled as a 2-port "black box", where the input terminals accept a current (and are modeled by 'zero' resistance to that current), and the output is a function of the input current. the output may be a voltage or current (or other varying physical parameter, such as resistance). A bipolar transistor is well modeled as a current controlled device. The collector (output) current is a function of the base current: Ic = Beta * Ib. The hybrid-pi model changes that from a current controlled device to a voltage controlled device: Ic = F(Vbe), but the BJT transistor is still basically a current controlled device.
BJT is a current controlled device because its output current is dependent upon the current in the base while for FET it is controlled by the voltage at the gate terminal of the transistor. BJT is a current controlled device because its base current is not zero while for a FET the gate current is zero
A silicon controlled rectifier falls into this category.
Independent SourcesIndependent sources produce current/voltage at a particular rate that is dependent only on time. These sources may output a constant current/voltage, or they may output current/voltage that varies with time.Dependent SourcesDependent sources are current or voltage sources whose output value is based on time or another value from the circuit. A dependent source may be based on the voltage over a resistor for example, or even the current flowing through a given wire. The following sources are possible:Current-controlled current sourceCurrent-controlled voltage sourceVoltage-controlled current sourceVoltage-controlled voltage sourceDependent sources are useful for modelling transistors or vacuum tubes.
yes it is current controlled
Because it is controlled by the gate current
The difference between a current control device and voltage controlled device is that for current controlled device, the current is constant and the voltage is variable while for a voltage controlled device, the voltage is constant and the current is variable.
it is controlled by butts
In the switching transistor the output current is controlled by the (current) and this is also called current controlled current device (CCCD). But in ordinary switch we controlled output current physically...
The On/OFF action in UJT is controlled by emitter current
Previous answer "TRANSISTORS are current controlled voltage soruce" Nup, current-controlled current controller. Named as a contraction of TRANSference resISTOR.
It is modeled as a 2-port "black box", where the input terminals accept a current (and are modeled by 'zero' resistance to that current), and the output is a function of the input current. the output may be a voltage or current (or other varying physical parameter, such as resistance). A bipolar transistor is well modeled as a current controlled device. The collector (output) current is a function of the base current: Ic = Beta * Ib. The hybrid-pi model changes that from a current controlled device to a voltage controlled device: Ic = F(Vbe), but the BJT transistor is still basically a current controlled device.
a switch
Electromagnets can be controlled by adjusting the amount of electric current passing through the wire coil. Increasing the current strengthens the magnetic field, while decreasing the current weakens it. Additionally, the direction of the magnetic field can be controlled by changing the direction of the current flow through the coil.
RPS is only the voltage& power controlled device. it can only used for set the input for our wish A device which can change its output according to the voltage supplied to it is called a voltage controlled device.ex. a voltage controlled current source,or a field effect transistor. In a voltage controlled current source the output current changes as the voltage supplied to it changes.