A dead short in DC refers to a direct connection between the positive and negative terminals of a DC power source, resulting in minimal or no resistance in the circuit. This condition can cause a large surge of current to flow, potentially damaging components, overheating wires, and posing a fire hazard. It's critical to avoid dead shorts in electrical systems to maintain safety and prevent equipment failure.
short leads
When DC power is first applied to an uncharged capacitor it appears as a short circuit.
A short circuit.
If a DC supply is connected to the incomer of a transformer, you effectively have a short circuit, because the DC impedance of a transformer (actually, any inductor) is quite low. You will blow something.
no. because if we use dc source for transformer there will be no production of energy for the secondary side since they are mutually conducted, as the transformer is a static device which can transmite the energy from one circuit to other with out changing the frequency and also there is no movement of the conductors. in order to produce the emf there should be either conductor movement or moving flux so the dc source will produce constant field flux hence there is no production of energy in the secondary side.
POL
No he is not dead
because it dc not ac
In DC inductor is short circuited .
DMV is short for The District, Maryland, Virginia areas which encompasses DC.
AnswerThere is a hard rock band called AC/DC .In electrical jargon, AC is short for alternating current and DC is short for Direct current.
A dead short to ground or an overloaded circuit.A dead short to ground or an overloaded circuit.
Dead cell, or dead short.
short leads
No. DC Comics will never kill off Batman.
Buried Treasure - short story - was created in 1936.
stick urwein in it