0
What else can I help you with?
What is the difference between BTECH in petroleum engineering BE in petroleum engineering and BTECH in petroleum technology and which is best?
In Bteck - THERE R 'TCK' this three word r extra
What is phase difference?
A phase difference between two periodic signals is the time difference between two corresponding points on each signal. This time difference is usually measured in degrees or radians, but can be given as a unit of time as well.
What is the difference of GGG-40 and GGG-50 in butterfly valves?
The difference between the GGG-40 and GGG-50 butterfly valve is the suitable temperature. The GGG-40 is recommended for 45 degrees C to 150 degrees C and the GGG-50 is recommended for 35 degrees C to 130 degrees C.
The typical temperature difference between the entering air and the boiling refrigerant on a standard air-conditioning evaporator is?
The typical temperature difference between the entering air and the boiling refrigerant on a standard air-conditioning evaporator is usually around 10 to 20 degrees Fahrenheit (approximately 5 to 11 degrees Celsius). This difference allows efficient heat transfer, ensuring that the refrigerant can absorb heat from the air and cool the indoor environment effectively. However, the exact difference can vary based on system design and operating conditions.
Phase difference between voltage and current at resonance?
The power factor is a measure of the phase difference. If they are exactly in phase the PF = 1. If they are 180 degrees out of phase PF = 0.
Is a AMIE or BTech is better?
AMIE and BTech are engineering degrees. The main difference between the two is that, AMIE has a central syllabus but BTech has state syllabus.. AMIE courses are being conducted by The Institution Of Engineers (India) While different universities conduct BTech.
How is MAGADH universities B.SC Eng different from the usual BE or BTECH.Is this a 4 years or 3 years degree. If BSC Eng is same as BE or BTECH then why does magadh not issue degrees as BE or BTECH?
What is the difference between BTech Degree in Radiography and BSc in Radiography offered in South Africa?
What is the difference between bcom and btech?
btech is a degree obtained at any university of tecnology whilst a bcom is obtained at any university however they is no diffrence between the qualifications
What is the difference between BTECH in petroleum engineering BE in petroleum engineering and BTECH in petroleum technology and which is best?
In Bteck - THERE R 'TCK' this three word r extra
What is the difference between -1fahrenheit degrees and -5 degrees Fahrenheit?
There is a difference of four degrees.
What is the difference between positive l20 degrees and negative 20 degrees?
The difference between +120 and -20 is 140 degrees.
What is the difference between 14 degrees and -5 degree?
The difference between 14 degrees and -5 degrees is 19 degrees. If you are calculating the absolute value of the temperature difference, it would be the same as 19 degrees.
What is the difference between minus 30degrees and 20 degrees?
The temperature difference between -30 degrees and 20 degrees is 50 degrees. Negative 30 degrees is 50 degrees lower than 20 degrees.
What is the difference between 16 degrees Celsius and 28 degrees Celsius?
The difference is 12 degrees.
What is the difference between 11 degrees and -6.5 degrees?
The difference between 11 degrees and -6.5 degrees is 17.5 degrees. This is calculated by subtracting the lower value (-6.5) from the higher value (11) to find the absolute difference between the two temperatures.
What d difference bw BTECH n BE?
Btech is Bachelor of Technology BE is Bachelor of Engineering
What is the difference between 0 degrees Celsius and 10 degrees Celsius?
The difference is 10 Celsius degrees.
