Drilling is a cutting process in which drill is used to make a hole. Drilling process usually creates rough surfaces. Therefore, reaming is done after drilling to make a good surface finish, without changing the chemical and physical properties of the material.
In reaming, only 5% of the material is removed (rest is removed by drilling process done before).
Drilling - Make/drill holes of standard sizes using drill bits Boring - Enlarge the drilled holes to the req. dimension/diameter ( i.e. non.std. sizes ) using boring tool
Conventional Drilling is the drilling of a vertical well through reservoir rocks to TD. Directional drilling is the drilling of a non-vertical well horizontaly through a source rock.
difference between lathe and drill machine doing full on piece of metal
Both are same
a drilling machine is used to drive nails and screws into position while boring tools are used to bore holes into wood
Drilling - Make/drill holes of standard sizes using drill bits Boring - Enlarge the drilled holes to the req. dimension/diameter ( i.e. non.std. sizes ) using boring tool
Conventional Drilling is the drilling of a vertical well through reservoir rocks to TD. Directional drilling is the drilling of a non-vertical well horizontaly through a source rock.
what is reaming what is reaming
difference between lathe and drill machine doing full on piece of metal
difference between lathe and drill machine doing full on piece of metal
Both are same
Both are same
Both are same
Boring is generally more accurate than reaming. Also, reamers can only get so large and/or so long before they become unreliable and/or very expensive.
a drilling machine is used to drive nails and screws into position while boring tools are used to bore holes into wood
reaming can be done on lathe machine - only precaution taken is the reamer is not drawn back till the reaming is complete. Proper coolant is used and the rpms are maintaind slow
An oil rig is an oil platform or oil production platform. A drilling is different though.