Flash steam is the condensation caused by reducing pressure.
Flash sterilization is a process used to clean objects. Rapid penetration of steam is used to sterilize and clean the items.
gland steam temp should be nearer to less than turbine lub. oil flash point.
Flash as in camera? No. Flash as in Flash Player? No
There are three kinds of steam 1) saturated steam, 2)super saturated steam 3) wet steam.
If by dry steam you mean superheated steam then dry steam because it has a higher calorific value
Flash steam is steam that is produced when high temperature high pressure water is released to the atmosphere.
Flash sterilization is a process used to clean objects. Rapid penetration of steam is used to sterilize and clean the items.
It works on the principle that condensate at a given temperature will flash to steam after pressure has been significantly reduced.
gland steam temp should be nearer to less than turbine lub. oil flash point.
The three main types of geothermal power plants are dry steam, flash steam, and binary cycle plants. Dry steam plants utilize steam directly from geothermal reservoirs to turn turbines. Flash steam plants draw high-pressure hot water, and as it rises, the pressure drops, causing some of it to "flash" into steam, which then drives the turbine. Binary cycle plants transfer heat from geothermal hot water to a secondary fluid with a lower boiling point, which vaporizes and drives the turbine, making them suitable for lower-temperature resources.
You can buy Portal through a program called steam. store.steampowered.com
Dry Steam Power Plant : generates power directly from the steam from inside the earth.Flash Steam Power Plant : Flash steam plants use waters at temperatures greater than 360F. As this hot water flows up, it is collected in a flash tank where drop in pressure causes the liquid to boil into steam. The steam is then used to run turbines which in turn generate power. The condensed steam is returned to the reservoir.Binary Steam Power Plant : This type of plant uses high temperature geothermal water to heat another liquid which has a lower boiling point than water.
The Holy Bible, Dewey number 220 ( by the way the flash point of steam!)
Flash Steam is the most common type of electricity generation in California.
All geothermal power plants use steam to turn large turbines, which run electrical generators. This steam comes from steam produced from reservoirs of hot water found a couple of miles or more below the Earth's surface. There are three types of geothermal power plants: dry steam, flash steam, and binary cycle.
The water will flash to steam, resulting in what is known as a phreatic eruption.
when hot fat is dropped into water it causes the water it contacts to flash boil. the "explosion" you see is the steam trying to escape.