The lines of flux are crowded at the ends of magnets, this phenomena is called fringing.
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
In magnetic circuits, such as occur in transformers and motors, the flux density is inversely proportional to the frequency, so a drop in frequency could cause overheating through excessive flux density.
light speeeed mofos
Basically useful fluke is the flux that flows with in the magnetic circuit of an armature. That is why when there is an air gap the flux enters the armature which makes it useful flux! Hope that answers your question!
If you did not use flux in soldering or metal joining processes, you would likely encounter poor adhesion between the metals. Oxidation can occur on the surfaces, preventing the solder from properly wetting and bonding to the materials. This can lead to weak joints and potential failures in the assembly, compromising the overall integrity of the finished product. Additionally, without flux, the solder may not flow as effectively, resulting in uneven or incomplete connections.
You shouldn't need to. Except for minor fringing, the majority of the flux will remain within the magnetic circuit -i.e. the yoke, pole pieces, etc.
It is nothing but the effect of flux which is reduced slightly due to fringing effect. it depends on the material used for the stator and rotor design. as well as shape of the slots.
Spherochromatism, also known as color fringing, is an optical phenomenon that causes different wavelengths of light to focus at slightly different points, resulting in color fringing on the edges of objects in an image. This can occur in lenses that are not well-corrected for chromatic aberration, particularly at wide apertures.
Fringing reef is made up of many plankton and grows 100-20 yards from the shore, such as a lagoon.
Coral reefs can take four forms; fringing reef, platform reefs, barrier reefs and atolls. Fringing reefs are narrow and shallow, and generally occur near the shore, they literally are a thin 'fringe' along the coast. Platform reefs are reef outcroppings far from shore that occur in calm water. They often have a shallow lagoon, and are flat on top. Barrier reefs are reefs growing along a coastline that are separated from the coastline by a lagoon. Barrier reefs are very similar to fringings except that they are much larger. Atolls are ring reefs that usually form at the base of a volcano. Over time the volcano dissapears, leaving a rin of reef surrounded by deep ocean.
Yes
fringing, coral, and barrel
im trying to find the answer!
A fringing reef
jylhhjgln/gfsdhkguyfgcfgy
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
Hi, if you really wanna reduce magnetic fringing effect, then you have to keep + side in water for two days and then can have a test of effect streangth, it will be reduced to 50%.