answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

Which variable frequency drive should I use for a 1.5 ton inverter AC?

You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in inverter. Even if you connect an inverter to the AC, you need another control device to control the VFD to control the speed of the fan/ compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.


An scr is an electronic device that?

That is used as a switching device. They are very common in Inverter circuits and can switch up to 1000's of amps.


I have a 5kVA inverter and the inverter will be off always. when the main source fails the inverter should feed supply to laod. in this case my inverter is overloaded due to initial surge. what to do?

To prevent you backup Inverter from sudden overloading. You should manually control your Inverter. When power fails. Shut down all loads. Turn on your Inverter with a with no loads on the AC line. The slowly begin to turn on loads to your backup Inverter. Start with just the lighting systems and then work you way to higher current loads such as Air Conditioning Units. Another way to solve your problem is add maybe 5 additional Units in parallel. You need to calculate all the power loads in your house is using making sure your inverter can handle the complete load. Why the Inverter fails is due to high inductive loads. The Inductive loads appear as a short circuit to you Inverter. The only way around that problem is to limit the number of inductive loads the your Inverter is supplying power to.


How is an inverter constructed?

type of inverter


Can you make an inverter using diode?

An inverter typically requires active components like transistors or operational amplifiers to switch the input DC voltage into an AC output. While diodes can be used in certain configurations, such as in a basic half-wave rectifier or for clamping purposes, they alone cannot create an inverter function. Instead, they can facilitate the process in combination with other components, but a complete inverter circuit relies on switching elements to alternate the current direction.

Related Questions

Does an inverter on a 5th wheel have an on off switch?

Does an inverter on a 5th wheel have an on off switch


Are a switch and inverter the same?

No. A switch can turn the electricity on/off, but an inverter can provide electricity(for a limited amount of time) if their is a power failure.


Where is the ac power inverter reset on the jeep 2008?

The Jeep air conditioning power inverter reset switch can be found on the firewall in the engine compartment. The switch will be on the passenger side of the firewall.


How long can you make use of the AC of an inverter?

Until you switch off!


Principle of inverter?

voltage control tech.of inverters??


How do you make a inverter?

Capacitors to store DC voltage, transistors to switch power to the AC load, plus control circuitry to time the switching to match the (assumed) 60Hz AC frequency.


How do you make a 1000watt inverter?

Capacitors to store DC voltage, transistors to switch power to the AC load, plus control circuitry to time the switching to match the (assumed) 60Hz AC frequency.


How can you set remote contoling system in inverter?

To set up a remote controlling system in an inverter, first ensure that the inverter is compatible with remote monitoring and control features. Next, connect the inverter to a remote communication module, such as Wi-Fi, Bluetooth, or cellular, depending on your preference. Then, use the manufacturer's app or software to configure the settings, allowing you to monitor and control the inverter from a distance. Finally, test the system to ensure proper communication and functionality.


Which variable frequency drive should I use for a 1.5 ton inverter AC?

You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in inverter. Even if you connect an inverter to the AC, you need another control device to control the VFD to control the speed of the fan/ compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.


What is working principle of inverter welding machine?

Digital Control of welding when welding


What is self control of synchronous motor drive?

the self control of a synchronous motor is done using an inverter fed through a dc link.speed is controlled by varying the output frequency of the inverter by controlling the dc link voltage


How do you design a multilevel inverter?

the design of multilevel inverter can be done by using is the mosfets ....multilevel inverter is the inverter which cna reduce the harmonics by increasing the voltage levels ANSWER: The design of multilevel converter is the same as a single converter. The feedback control however comes from the most hi current output capacity circuit.