If the pressure treatment is identical, theoretically they should perform equally.
Pressure treated wood can last up to 20 years or more and most pressured treated wood sold in stores such as Home Depot offer a limited lifetime warranty.
yes it can
Pressure treated timber is timber impregnated with chromated copper arsenate under pressure and vacuum cycles. These preserve the timber from various fungicides that would normally eat the timber reducing its life-span.
No - pressure treated wood contains toxic chemicals added during the preserving process. When the wood is burned the toxic chemicals are released into the surrounding air. Breathing them is really bad for you.
To install border edging in your garden, first, outline the area where you want the edging to go. Then, dig a trench along the outline and place the edging material into the trench. Secure the edging in place with stakes or anchors. Finally, backfill the trench with soil to secure the edging in place.
To install aluminum edging, first measure and cut the edging to fit your desired length. Then, dig a trench along the edge of your garden bed and place the edging into the trench. Secure the edging in place with stakes or screws. Finally, backfill the trench with soil to hold the edging in place.
Pressure treated wood typically takes about 2-3 days to dry after it has been treated.
The best stain for pressure treated wood is a high-quality, oil-based, penetrating stain that is specifically designed for use on pressure treated wood.
Preservatively-treated (pressure-treated) wood does not meet the standard, unless the wood was heat-treated and stamped HT prior to preservative treatment.
To determine if lumber is pressure treated, look for small incisions or punctures on the surface of the wood, which indicate that chemicals have been forced into the wood under pressure. Additionally, pressure-treated lumber is typically labeled with a stamp or tag indicating that it has been treated.
To determine if wood is pressure treated, look for small incisions or punctures on the surface of the wood, which indicate that chemicals have been forced into the wood under pressure. Additionally, pressure-treated wood is often labeled with a stamp or tag indicating that it has been treated.
Wolmanized Wood is a brand of pressure treated wood.
Yes, you can stain pressure treated wood to improve its appearance.
Pressure treated wood is soaked in a special chemical to prevent rotting. Pressure treated wood products have "holes" in them, so the liquid can be readily absorbed for optimal saturation.
A pressure treated with those measurements will be about 350 lbs. That is more than the common standard pressure treated measurements.
If the pressure treatment is identical, theoretically they should perform equally.