answersLogoWhite

0

It is the ratio of the difference in slope at beggining and end of sweep to initial value of sweep.This error is due to deviation fron linearity.The important requirement of sweep is that it must vary linearly with time.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

What is sweep time in an oscilloscope?

Sweep time in an oscilloscope refers to the duration it takes for the horizontal sweep of the display to cover one complete cycle of the input signal. It is typically measured in seconds per division, allowing users to adjust how quickly the oscilloscope scans the signal over time. A shorter sweep time provides a more detailed view of rapid signal changes, while a longer sweep time can display slower variations more clearly. Properly setting the sweep time is crucial for accurately analyzing signal behavior.


Constant current generation of linear sweep voltage using op-amp?

When using the Op-amp we get constant current generation of the linear sweep voltage.


What are the disadvantages of the up sweep technique?

You can hurt your feet


What is voltage sweep generator?

A: Sometimes a spectrum of frequency must be analyzed a voltage to frequency converter can be used to sweep a range of frequency just by changing some DC level.


What is nested dc sweep of pSPICE?

A nested DC sweep in PSpice is a simulation technique that allows you to perform multiple DC sweeps in a single analysis, where the output of one sweep serves as the input for the next. This enables the examination of circuit behavior over a range of conditions, such as varying both voltage and current sources simultaneously. For example, you can sweep a voltage source while simultaneously sweeping a current source, allowing for a comprehensive analysis of the circuit's performance. This approach is particularly useful for complex circuits where interactions between multiple parameters are critical for understanding overall behavior.