Basically synchronized cardioversion is shocking at a particular point in the sinus rhythm. It is used for supraventricular tachycardia and atrial fibrillation / flutter. These are rhythms the AED is not programmed to shock; recall AED shocks for VF and VT. See the related link.
to synchronize the angel in degrees from source to load
You synchronize a generator to the grid by matching voltage and phase. Usually, but this depends on the particular system, you bring the generator's voltage to slightly higher than the grid, and its speed to slightly faster. At the moment of phase match, or slightly before, you close the tie-in breaker and simultaneously close the steam bypass valves. The generator should immediately pick up load. You then adjust exciter voltage to get your MVars right, and trim as needed.
A diesel generator may not synchronize due to several reasons, including mismatched voltage, frequency, or phase sequence with the grid or other generators. Additionally, issues such as faulty synchronizing equipment, improper governor settings, or load imbalances can prevent synchronization. It's also essential to check for any mechanical problems or malfunctions in the generator that could affect its performance. Proper troubleshooting and adjustments are necessary to resolve these issues.
To synchronize an AC generator online, first ensure both the generator and the grid are operating at the same voltage, frequency, and phase sequence. Use a synchroscope or synchronizing lights to visually compare the phase angle. Adjust the generator's speed to match the grid frequency and use the governor to control the load. Once aligned, close the generator's circuit breaker to connect it to the grid, ensuring a smooth transition without causing disturbances.
To auto synchronize an alternator with grid, consider the manual method first... 1. Adjust RPM so that frequency is slightly higher than the grid2. Adjust excitation current so that voltage is slightly higher than the grid3. Just before phase angle of zero is encountered, close the breaker4. Immediately adjust input power (close steam bypass valves) and adjust excitation current to achieve desired watts and vars5. Monitor and trim as needed So, to do this automatically, build a controller that does this. A computer, perhaps?
Yes.
Most often, cardioversion is used to treat atrial fibrillation or atrial flutter. Life-saving cardioversion can be used to treat ventricular tachycardia and ventricular fibrillation.
Synchronized cardioversion is typically used to treat certain types of tachyarrhythmias, particularly atrial fibrillation, atrial flutter, and some forms of supraventricular tachycardia that are causing hemodynamic instability. It is essential to synchronize the shock with the R wave of the QRS complex to avoid inducing ventricular fibrillation. This procedure is often performed when a patient is symptomatic or in critical condition due to these arrhythmias.
Cardioversion is used to stop this abnormal beating so that the heart can begin normal rhythm and pump more efficiently.
Defibrillation also known as cardioversion.
Basically synchronized cardioversion is shocking at a particular point in the sinus rhythm. It is used for supraventricular tachycardia and atrial fibrillation / flutter. These are rhythms the AED is not programmed to shock; recall AED shocks for VF and VT. See the related link.
From the related link, Synchronized Cardioversion is: --A controlled form of defibrillation for patients who still have organized cardiac activity with a pulse.
Most software these days is designed to be used across multiple platforms and programs. Usually all that is needed to synchronize files in programs such as Outlook Express or Dropbox is to press the synchronize files button.
in about 50% of cases, the heart prefers its abnormal rhythm and reverts to it within one year, despite cardioversion.
Ventricular tachycardia lasting more than 30 seconds and ventricular fibrillation require immediate cardioversion.
The prefix of synchronize is "syn-", which means "together" or "with."
The suffix of synchronize is -ize. The suffix is the bit at the end of the word.