answersLogoWhite

0

you can get an idea by looking at the insulators

they must function in rain or snow

dew can collect on the insulator

they are made of porcelain with a glazed surface

3" diameter gives about 3" length of dew coated glaze and is safe at about 5000V

so if the insulator has 3 skirts its about 15,000V

10 skirts about 50,000V

the drops to the houses are low voltage and may be as little as 1/2 of glazed surface 600V or less

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the voltage on a railway?

Overhead wires on the railways are 250v


How does an electric train work?

An electric train works by using electricity from overhead wires or a third rail to power an electric motor, which then drives the train's wheels to move it along the tracks.


How does the national grid brings electricity to homes?

By overhead cables, supported on masts, at very high voltage, to reduce the effects of resistance in the wires.


Why overhead transmission lines would be more economical than underground transmission lines in high voltage transmission?

Overhead wires do not require insulation, and it is easier to plant poles than dig miles of trenches.


What has the most common element used in wires?

Copper is used in electric wires because it is the best conductor of electricity that is known, apart from silver which is slightly better. For overhead wires a common material to use is aluminum because it is much lighter, although not such a good conductor. Overhead high-voltage wires usually use aluminium stranded wire with one or more steel strands in the centre to give strength.


Is there still current in the overhead wires that lead to a house when the house electricity is off?

Assuming there is not a "power outage" to all houses in the area (otherwise known as a "power cut") then the answer is: Yes, the potential (voltage) is still in the overhead wires that lead to a house when the house electricity is only turned off at its own main switch inside the main breaker box.


What is the energy conversion for a train?

A train typically converts electrical energy from overhead wires or fuel energy from diesel engines into mechanical energy to power its wheels and move forward. The mechanical energy is then used to overcome friction and propel the train along the tracks.


Is there a fluctuation of voltage in a moving train?

Yes, there is a fluctuation of voltage in a moving train


How power supply is given to electric train?

There are two methods of delivering power to an electric train... (1) Through overhead wires. The engine has a pantograph device on the roof. this is raised until it's in contact with the overhead wires. Current travels down the pantograph, and into the engine. (2) Through a 'hot shoe' and 'third rail'. The current is fed to an extra rail running either to one side of the existing track, or 'sanwiched' between them. Again the hot-shoe delivers the current to the engine. Overhead wires are more common in cross country lines, whereas third-rail systems are more common in underground (subway) systems - where overhead space is a premium.


Is overhead an adverb?

Overhead can be an adverb. But it can also be an adjective or noun. Planes flying "overhead" would be an adverb. Overhead wires would be an adjective. The overhead of a business would be a noun.


Is is overhead an adverb?

Overhead can be an adverb. But it can also be an adjective or noun. Planes flying "overhead" would be an adverb. Overhead wires would be an adjective. The overhead of a business would be a noun.


Can you put low voltage sound wires and low voltage light wires in the same conduit?

noyou can not