1 94-pound bag of cement is approximately equal to 1 cubic foot.
To find out how many 94-pound bags of Portland cement are needed for a yard of sand, you typically use a 1:2:3 mix ratio (cement, sand, gravel) for concrete. Since a yard of sand weighs about 1,600 pounds, you'll need approximately 533 pounds of cement for that mix. Given that each bag of Portland cement weighs 94 pounds, you would need about 6 bags (533 ÷ 94 ≈ 5.67). Therefore, you would need 6 bags of Portland cement for a yard of sand.
Depends on the size of the bag, normally around 2000 kilos.
An 80-pound bag of premixed cement = .667 cubic feet, or 2/3 of a cubic foot, of concrete. A 60-pound bag of premixed cement = .5 cubic feet, or 1/2 of a cubic foot, of concrete.
well concrete mix is a 1/3 gravel , 1/3 sand and 1/3 portland cement . I hope this helps.
There are 27 cubic feet in a cubic yard, and a 60-pound bag of cement typically yields about 0.45 cubic feet when mixed. To fill one cubic yard, you would need approximately 60 bags of 60-pound cement.
volume of 1 cement bag is 0.035cu.m.
42.7kg, or 94 pounds. BTW, a bag of portland cement contains one cubic foot of the product.
94 pounds or 42.6377kg
The volume of a 42.5 kg bag of cement can be estimated based on the density of the cement, which is typically around 1,440 kg/m³. Using this density, the volume can be calculated as follows: Volume = Mass / Density. Thus, the volume of a 42.5 kg bag of cement is approximately 0.0295 cubic meters, or about 29.5 liters.
94 pounds per bag.
A 50kg bag of cement is generally 33l. Generally 2 x 50kg bags fill 1 x 65l wheelbarrow. If you are unsure, read the back of the bag. Or check with your manufacturer. The RD is a comparison with the same volume of water at a controlled temperature. This should not be used to calculate the volume of cement in a bag. Use the Bulk Density of that type of cement. That info can be obtained from the manufacturer. An example is Ordinary Portland Cement (OPC) has a bulk density of 1500kg/m3. This means it is 1.5kg/l. 50kg/1.5 = 33.3l.
To properly answer this question, one would need to know the volume of a "bag", since "bag" isn't any standard of volume or weight. Typical Portland Cement has a density to 1505kg / cubic meter. In addition, one would also need to know the coarseness of the gravel, as the ability of the sand and cement to fill in the aggregate depends heavily on the average size of the gravel pieces.
To calculate the density of cement, you need to know the mass of the cement and its volume. Divide the mass of the cement by its volume to get the density. The density of cement is typically around 1,440 kg/m³.
to calculate the volume of any bag we need to know the density. In freshly packed bags the standard density is 1440 kg/m3.Example: to know the volume of a 50kg cement bag we divide the bag weight by the density, i.e.:50 kg ÷ 1440 kg/m3 = 0.0347 m350kg = 0.0347 m3,50kg = 1.23 CFT======================================In the USA, a bag of cement usually weighs 94 pounds and has a volume of 1 cubic foot.
6.50 for a 50 pound bag 12 cents a pound
70 lb = 31751.465 g or 31.751 Kilo's
Depends on the size of the bag, normally around 2000 kilos.