0
depends on what area of the country you live in. In the southwest you can expect to pay $2.00 - $3.00 for a licensed, bonded and insured installer. Given the current state of the economy you might find it for less. But, please beware that in the end you get what you pay for. I would always recommend finding an established retailer or installation company to perform any work in your home. Answer Most times the installation is roughly the same as the cost of the material you want installed.
What else can I help you with?
How much should a contractor charge for installing laminate flooring?
A contractor typically charges between $2 to $8 per square foot for installing laminate flooring, depending on factors like the complexity of the job, the quality of the flooring material, and regional labor costs. Additional costs may arise for removing old flooring, subfloor preparation, and any necessary underlayment. It's advisable to get multiple estimates and ensure the contractor is experienced in laminate installation for the best results.
What is labor cost of installing rubber tile?
It depends. There are several types of rubber flooring. Where someone lives will also be a factor as prices do not remain the same from place to place. A standard 18-20 in by 1/8 in tile around me at installer rate is .75 to 1.50 per square ft.
What is the average cost of installing one ton of aggregate base?
The average cost of installing one ton of aggregate base typically ranges from $10 to $25, depending on factors such as location, material quality, and labor costs. Additional expenses may arise from transportation and site preparation. It's advisable to obtain quotes from local suppliers for a more accurate estimate.
Technician a says the labor manuals guide to average amount of time a job will take technician B says the labor manual specifics the dollar amount to charge the customer who is correct?
Technician A is correct. Labor manuals show the average labor time a job should take. It is up to the individual shop to determine the labor rate.
Do you need a license to install tile and wood flooring in CA.?
In California, a contractor's license is typically required to install tile and wood flooring if the total cost of labor and materials exceeds $500. This means that anyone performing this work for hire must have a valid California contractor's license, specifically a C-15 flooring and floor covering license. However, homeowners can install flooring in their own homes without a license. It's always advisable to check local regulations, as requirements may vary by city or county.
How much should a contractor charge for installing laminate flooring?
A contractor typically charges between $2 to $8 per square foot for installing laminate flooring, depending on factors like the complexity of the job, the quality of the flooring material, and regional labor costs. Additional costs may arise for removing old flooring, subfloor preparation, and any necessary underlayment. It's advisable to get multiple estimates and ensure the contractor is experienced in laminate installation for the best results.
How much should 400 sq ft of laminate plank flooring cost in labor only?
Labor costs for installing laminate plank flooring can vary widely based on location and the complexity of the project, but on average, you can expect to pay between $1.50 to $3.00 per square foot for labor. Therefore, for 400 square feet, the labor cost could range from approximately $600 to $1,200. It's advisable to get multiple quotes from local contractors for a more accurate estimate.
What is the average labor cost for installing tile flooring in Nashville TN?
Depends on the work. Different price for wall and floor
What is the average labor cost for installing a laminate floor in the Chicago area?
$50. Anything higher is a rip-off. Anything lower must be a scam.
What is average labor cost for installing two oxygen sensors?
125.00
What is the average labor cost to install fiber cement siding in Georgia?
cost of labor installing fiber ends
What is the average labor cost of installing linoleum?
45 to 65 cents a sq ft
How to Choose Between a Hardwood and Laminate Floor?
When shopping for hardwood floors for your home, you’ll have to make a choice between installing a real hardwood floor or a laminate floor. It might seem like a cut and dry decision that choosing real hardwood is the better option, but owning a laminate floor has its merits. When you have to make the choice between a hardwood floor and a laminate floor, the deciding factor is always money. Hardwood floors cost much more than laminate floors, which makes laminate flooring a great option for people who are on a tight budget. In the past, laminate floors often looked cheap and inferior to real hardwood flooring, but with newer manufacturing techniques and increased consumer demand, it is often hard to tell the difference between a laminate floor and the real thing. The next issue that you need to think about when choosing between a laminate floor and hardwood is where you plan to install the floor. Real hardwood floors are not easy to install in every room. This is because real hardwood planks need to be glued to a subsurface or nailed into place. Doing so may be impractical and expensive. For example, if you have to install a hardwood floor over a cement slab, you will need to level the slab, sand it, and then apply glue, all labor intensive jobs that can cost a lot money. You also have to be careful about installing a real hardwood floor in places like the bathroom or kitchen where there the potential for a lot of exposure to moisture, which may cause the floor to warp or buckle. Instead, a laminate floor may be ideal. These floors are installed very easily without the need for glues or nails and can be placed over virtually any subsurface. Finally, you may want to consider the durability and ease of maintenance that a laminate floor has to offer. Laminate floors are resistant to scratching, fading, staining, and impacts that can damage the surface of real hardwood floors. On top of this, they are easy to clean, needing only a light vacuuming and mopping every now and then. Because of this, they are ideal flooring options for people who have kids or pets that may dirty the house a lot. If you’re making the decision between hardwood and laminate flooring, make sure you think about these things before making your purchase. Real hardwood floors are not suitable for every home and for every family. If yours is one of them, laminate flooring is a good choice.
What is the average price of installation from Bruce Hardware Floors?
The average labor price for installation of prefinished wood flooring is $2.00-$3.50 per square foot. The average prices to install, sand and finish unfinished wood flooring is $4.00-$7.00 per square foot.
I need to redo my kitchen floor and I need to know if bamboo flooring will cost me more than tile flooring?
Bamboo flooring is generally less expensive than tile. The raw materials may cost a little more, but you will save on the labor involved installing the bamboo floor. It is also much faster to install a bamboo floor.
How can I finish my basement for under 5,000?
Finishing a basement for under 5,000 can be achieved by focusing on cost-effective materials and DIY labor. Consider using affordable flooring options like laminate or vinyl, painting walls instead of installing expensive finishes, and utilizing second-hand furniture or decor. Prioritize essential renovations like insulation, lighting, and waterproofing to ensure a functional and comfortable space within your budget.
What is the average labor costs for a pergo floor?
Labor costs for installing a Pergo floor will be determined by how long the job takes. Typically a six hour Pergo floor installation will cost $400 in labor.
