It's called, `current`. It's rated in amps, milliamps, microamps, etc., representing a fraction of an amp.
The simple explanation is that the voltage is the `carrier`, and the current is the `power` which actually provides the energy to do the work.
The supply won't have to work as hard. It is perfectly acceptable, for example, to use a 1A, 12v supply to supply a 12v, .5A load. The current rating indicates the ability of the supply to dissipate heat caused by the current flowing. If the load current is above the power supply current rating, the power supply will overheat.
DC Power is Direct Current Power Supply.
The tool designed specifically to test DC current from a Molex connector is called a Power Supply Tester.
Your power supply can supply 1 A, but your device requires 2 A. So the power supply will be overloaded. So the simple answer is no.
A Consort EV265 power supply will begin reading low current and power during component failure like capacitors and resistors. When the appropriate amount of power is not flowing, readings and power output will fluctuate.
The current that flows from and back to the power supply in a parallel circuit is called branch current. Each branch in a parallel circuit has its own current flow that combines to form the total current drawn from the power supply.
The current that flows from and back to the power supply in a parallel circuit is called the total current. It splits into different branches based on the resistance of each branch but remains constant throughout the circuit.
The supply won't have to work as hard. It is perfectly acceptable, for example, to use a 1A, 12v supply to supply a 12v, .5A load. The current rating indicates the ability of the supply to dissipate heat caused by the current flowing. If the load current is above the power supply current rating, the power supply will overheat.
DC Power is Direct Current Power Supply.
Power is voltage times current.
it can simply be called a "power supply" or a PSU (power supply unit)
Household electricity is supplied to a pc's power supply module as alternating current (ac).The power supply converts it into direct current (dc) at various voltages - such as +12V , +5V, etc. - which are then delivered to the pc's subsystems.Some power supplies operate on 120 volts 60 Hz ac but others operate on 230 volts 50 Hz ac.Which voltage your power supply uses depends on which country you are in.For more information see the answers to the Related Questions shown below.
The word "developed" is slightly odd in this context. If the power supply provides a current to some instrument or device, the power supplied is the voltage multiplied by the current. The power supply will also consume some power itself to do this job. The total power consumed (provided to the power supply) equals the input current multiplied by the input voltage.
The function of the power supply is to convert wall current to the correct current for the computer and distribute power to all the internal computer components.
Rectification is the process of converting alternating current into direct current. The smoothest power supply is a 'switched mode' supply.
Power supplies can supply AC or DC current.
Alternating current