answersLogoWhite

0

If your bag length is 500mm long, the circumference of your drum including your printing plate shall be 500mm. Hence find the diameter of the drum and the plate, then deduct twice the plate thickness (say if the plat is 4 mm, it comes on both sides, so deduct 8mm from the diameter) and derive the circumference of the drum from this number.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Engineering

What is the wall thickness of 500mm pipe?

the wall thickness of sch 40 - 500mm dia pipe is 15mm or 16mm.


What is flow rate in a 500mm pipe?

Flow rate in a 500mm pipe refers to the volume of fluid that passes through the pipe per unit of time, typically measured in liters per second (L/s) or cubic meters per second (m³/s). The flow rate can be calculated using the pipe's diameter, fluid velocity, and the cross-sectional area of the pipe. For a 500mm (0.5m) diameter pipe, the cross-sectional area is approximately 0.196 square meters. To determine the exact flow rate, you would also need to know the velocity of the fluid flowing through the pipe.


How many millimeters thick is a concrete slab typically?

A concrete slab's thickness can vary greatly depending on the application. Typically, a concrete slab varies between 500mm to thousands of millimeters.


What is a crusher?

A crusher is a machine that crushes large rocks into smaller ones.There are various kinds of crushers used depending on the materials that need to be crushed.Jaw crusher is an ideal choice for primary crushing.Impact Crusher can be widely used in the first and secondary crushing, dealing with the material with the side length of 500mm, not more than 350Mpa anti-pressure strength.Cone crushers perform well in crushing various kinds of ores and rocks of medium or above medium hardness.


How can you calculated the weight of MS pipe diameter of 500MM and plate thickness 4MM and length6M?

how to calculate the weight of 30x30 squre tube 2mm thick