The chemical composition of 420 grade stainless steel is:- Chromium: 12-14 %-Silicon: max. 1 %- Manganese: max 1 %- Phosphorus: max. 0,04 %- Sulfur: max. 0,03 %- Carbon: min. 0,015 %
7850 kg/m^3
The density of mild steel typically ranges from about 7,750 to 8,050 kg/m³ (or 7.75 to 8.05 g/cm³). This variation can depend on the specific composition and processing of the steel. Mild steel, primarily composed of iron with a small percentage of carbon, is known for its durability and versatility in construction and manufacturing applications.
The density of steel, given as 7850, is typically expressed in kilograms per cubic meter (kg/m³). This measurement indicates the mass of steel in relation to its volume. In some contexts, it may also be represented as grams per cubic centimeter (g/cm³), which would be 7.85 g/cm³ for steel.
16 m m steel rod weight per meter = 1.5816 m m steel rod of 12metres weights = 12 * 1.58 = 18.96 kg
formula calculation of steel round bar > Area (square metres) of cross section * 7850 = kilograms per metre length. For other lengths, multiply answer by length in metres.
To calculate the weight of a stainless steel plate, multiply the volume of the plate (length x width x thickness) by the density of stainless steel (typically around 8000 kg/m^3). The resulting value will give you the weight of the stainless steel plate in kilograms.
The density of austenitic steel varies according to the type or grade. For one of the commonly used austenitic steel like Type 304, the density is 8.0g/cm3.
Stainless steel 430 has the density rho = 7,750 kg/m3 or rho = 7.75 g/cm3.
Sound velocity in steel - 5960 m/s Sound velocity in Stainless steel - 5760 m/s
The unit weight of a 8mm thick stainless steel plate (SS 409) is approximately 64.8 kg/m^2. This value may vary slightly based on the specific composition of the stainless steel material used in the plate.
7.184E-07 ohm-m
As current passes through steel, it heats up from resistive heating. As it heats up, it expands. A typical coefficient of thermal expansion for steel is 13x10-6 m/m K but the exact coefficient of thermal expansion of steel depends on the type of steel. For example:Coefficient of Linear Thermal Expansion for:(10-6 m/m K)(10-6 in/in oF)Steel13.07.3Steel Stainless Austenitic (304)17.39.6Steel Stainless Austenitic (310)14.48.0Steel Stainless Austenitic (316)16.08.9Steel Stainless Ferritic (410)9.95.5
$990
The velocity of sound in 410 stainless steel is approximately 5600 m/s. This value can vary slightly depending on the exact composition and structure of the material.
C.S density is 7.85 kg/m^3 it is wrong. the correct density for c.s. is 7.85 kg/dm3 the CS density is normally given as 7.85gm/cm^3 or 7850 kg/m^3
The density of EN8M steel is approximately 7850 kg/m^3.
As a general rule stainless steel is a little less than twice as dense as titanium. One method for determining the material makeup of an object would be to calculate its density. To do this the object would first have to be weighed, and its mass recorded (on earth with a relatively constant rate of acceleration due to gravity of 9.8 m/s^2 mass can be determined using a scale). Next, the volume needs to be determined. This could either be calculated for simple shapes by taking measurements and then applying formulas for volume of shapes or by submersing the object in a fluid and measuring the displacement. After determining the objects mass and volume, the density can then be calculated by dividing the weight by the volume. Stainless steel has a density of between 7480 and 8000 kg/m^3 and titanium 4500.