Logic gate
multiplexer is a device thet convert all inputs into a single output
An XOR gate is an Exclusive OR gate. The output is 1 if either one or the other inputs are 1. but remains at 0 if both inputs are 1.A normal OR gate will output 1 if both inputs or either is at 1.XOR means exclusivly OR, one or the other but not both.
A multiplexer, commonly referred as an input selector, is a circuit with many inputs but only one output: it has some data inputs, control inputs and one output, depending on the control inputs, one input from the data inputs is sent to the output .A demultiplexer is a circuit with one data input, few control inputs and many outputs, it is also known as output selector.
If the output of the operational amplifier is inconsistent with the inputs, then you are operating outside of the limits of the device. You might also have experienced lockup, a characteristic where the output locks in one state, but this still stems from operating outside of limits. Make sure the inputs are always within the specified range.
The big difference is inputs and outputs. Digital ICs expect high/low true/false inputs and outputs. Analog ICs take any inputs, and produce outputs of any level. For example, an audio amplifier is an analog IC. It takes an analog input (sound), and produces an analog output (louder sound). A ripple counter is an example of a digital IC. It takes a digital input (clock pulses), and produces a number of digital outputs (the digital outputs of the flip flops, collectively representing a number in binary).
Binary code is not a device. It is a numerical representation of data.
The binary AND operation has two inputs and one output.The binary AND operation will always produce a 1 output if both of its inputs are 1 and will produce a 0 output if one or both of its inputs are 0.In binary20013 = 100111000101101222692 = 110110010111100100When you perform an AND on these you get17444 = 100010000100100
No, it inputs a signal to the computer so it's a Input Device.
Binary code is not a device. It is a numerical representation of data.
Output device is simply a device which produces an output or result of any processing. For example: monitor is an output device which displays the output of the calculations done by the CPU.
multiplexer is a device thet convert all inputs into a single output
A scanner is an input device because it sends (or 'inputs') information to the computer.
Input When connected to a computer the camera inputs images
It is an Input devics because it inputs data into computer
its prints out by taking inputs from computer, so its a output device
Input device inputs data in to the computer such as mouse keyboard joystick and the computer outputs data to an output device such as printer speakers monitor
The difference is input programs information output tells you information