answersLogoWhite

0

A standard size oil drum, often referred to as a 55-gallon drum, typically has a diameter of approximately 22.5 inches (57 cm). These drums are commonly used for the storage and transportation of liquids, including oil and other chemicals. The dimensions can vary slightly depending on the manufacturer, but this size is widely recognized in the industry.

User Avatar

AnswerBot

4d ago

What else can I help you with?

Continue Learning about Engineering

How many 80 lb.bags of concrete mix does it take to fill an oil drum?

To determine how many 80 lb. bags of concrete mix are needed to fill an oil drum, first calculate the volume of the drum. A standard oil drum has a capacity of about 55 gallons, which is approximately 0.2 cubic meters or 7.4 cubic feet. Since an 80 lb. bag of concrete mix typically covers about 0.6 cubic feet, you would need roughly 12 to 13 bags to fill the drum completely.


What is the standard furnace oil pressure for combustion?

Most standard settings vary between 95psi to 140psi. This depends on what tip size @ angle is being used. Please note that tip size/angle is NOT the only deciding factor!


What is a dn600 flange?

A DN600 flange refers to a type of flange with a nominal diameter of 600 millimeters (mm), commonly used in piping systems to connect sections of pipe, valves, or equipment. The "DN" stands for "Diameter Nominal," which indicates the flange's standard size. Flanges can be made from various materials, including steel, stainless steel, and plastic, and are designed to accommodate specific pressure ratings and applications in industries such as water supply, oil and gas, and chemical processing. Proper selection and installation of DN600 flanges are crucial for ensuring leak-free connections in high-pressure environments.


What is the total that comes from a barrel of crude oil?

A standard barrel of crude oil is 42 US gallons or 160 liters.


What is diffirance pipe vs tube?

The purpose with a pipe is the transport of a fluid like water, oil or similar, and the most import property is the capacity or the inside diameter. For a ASME/ANSI B 36.10 Welded and Seamless Wrought Steel Pipe the inside diameter - ID - of a NPS 2 inches pipe with * schedule 40 is 2.067" * schedule 80 is 1.939" The inside diameters are close to 2" and the nominal diameter related to the inside diameter. Outside diameter are 2.375" for both schedules. Since the outside diameter of a single nominal pipe size is kept constant the inside diameter of a pipe will depend on the "schedule" or the thickness of the pipe. The schedule and the actual thickness of a pipe varies with the size of the pipe. It is common to identify pipes in inches by using NPS or "Nominal Pipe Size". The metric equivalent is called DN or "diametre nominel". The metric designations conform to International Standards Organization (ISO) usage and apply to all plumbing, natural gas, heating oil, and miscellaneous piping used in buildings. The use of NPS does not conform to American Standard pipe designations where the term NPS means "National Pipe Thread Straight". Nominal Bore (NB) may be specified under British standards classifications along with schedule (wall thickness). The tolerances are looser to pipes compared with tubes and they are often less expensive to produce. The nominal dimensions of tubes are based on the outside diameter. If we look at Copper Tubes - ASTM B88 the outside diameter of a 2" pipe is 2.125", relatively close to 2". The inside diameter of a tube will depend on the thickness of the tube. The thickness is often specified as a gauge. If we look at Copper Tubes - ASTM B88 the wall thickness of 0.083"of a 2" pipe is gauge 14. The tolerances are higher with tubes compared to pipes and tubes are often more expensive to produce than pipes.

Related Questions

How many kg in one drum of oil?

The weight of oil in a drum can vary depending on the type of oil and the size of the drum. However, a standard 55-gallon drum of oil typically weighs around 200-250 kilograms.


What size will fit 200 liters of oil?

200l drum


If you put a measuring stick into a 55 gallon drum of oil and received a reading of 14 inches how much oil is in the 55 gallon drum?

V=(πD2/4)h where D is the diameter of the 55 gallon drum and h is the height of the oil. Or if you prefer V=(2πr2h where r is the radius of the drum and h is as above.


What is the value of a 55 gal oil drum labeled standard oil co ne?

The value of a 55-gallon oil drum labeled "Standard Oil Co" can vary significantly based on factors such as its condition, age, and market demand among collectors or enthusiasts. Generally, if the drum is vintage and in good condition, it could be worth anywhere from $50 to several hundred dollars. However, its value may also be influenced by the historical significance of Standard Oil and any specific branding or designs on the drum. For an accurate appraisal, it’s best to consult a collectibles expert or auction house.


What is the actual filling capacity of an oil drum in US gallons 59.4 42 or 55?

Oil is measured in barrels (drums), equating to 42 US gallons.


How much does a drum of motor oil weigh?

The weight of a drum of motor oil can vary depending on the size and type of oil. On average, a standard 55-gallon drum of motor oil weighs approximately 300-400 pounds when full. However, this weight can fluctuate based on the specific gravity of the oil and the material of the drum itself. It is always recommended to check the manufacturer's specifications for the exact weight of the drum of motor oil you are referring to.


When was The Oil Drum created?

The Oil Drum was created in 2005.


What is the size of one drum being used by oil companies in supplying lube oil?

I have always heard them referred to as 55 gallon.


How many liters contain the drum?

The standard industrial oil (or barrel) drum has a capacity of 200-liters. In United States gallons (gal) one barrel holds 55-gal.


What Oil filter size for gmc acadia 2010?

Outside Diameter (In): 2.921 InchThread Size: M22X1.50Height (In): 3.450 Inc


How many liters in 1 drum of diesel?

A standard 55-gallon drum is equal to 208.2 liters.One standard size of metric "drum" is a plastic one holding 160 liters.This is roughly equal to the "barrel" measurement for oil (42 US gallons, 159 liters) which was the same as the English wine cask known as a tierce.210 litres


What are the dimensions of a 208 litre oil drum?

what dimension of 209 ltr oil drum