0
A person who had already finished eating his meal he feels that sufficient of food he intake if he take some more he will be getting omitting that will be compared as the return loss and when comparing to the insertion loss the person even if he eats that energy will not be produced due some internal problems that will be considered as the insertion loss.
What else can I help you with?
How do you calculate the heat loss for pump?
To calculate the heat loss for a pump, you need to determine the temperature difference between the inlet and outlet fluids and the flow rate of the fluid. The formula used is: Heat Loss (Q) = Flow Rate (m³/s) × Density (kg/m³) × Specific Heat Capacity (J/kg·K) × Temperature Difference (ΔT). Ensure you convert all units appropriately and account for any heat transfer to the surrounding environment as needed. This will give you the total heat loss in watts (W).
Difference between flux linkage and flux leakage?
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
What is the difference between weight loss and loss of size?
There really isn't much of a technical difference between loss of weight and loss of size. As you lose weight your size will naturally become smaller. But do keep in mind that muscle does weigh more than fat. Many people make the mistake of not eating anything to lose weight (dangerous idea!) and in turn lose a lot of their muscle mass. It is important to preserve muscle mass while you are loosing weight. Consuming lots of protein and lifting weights is the best way to build muscle, while the best way to lose weight is to consume less calories and exercise several days a week. So be sure to consume the proper types of protein (fish, turkey, chicken and other lean meats) and try to stay away from high calorie dense food.
What is the difference between cost and benefits when referring to an environmental project?
One has to see benefit and cost as opposing terms. For example, a benefit can be any advantage, gain, or profit whereas a cost is the opposite; it can be a disadvantage, a loss, or an expense. Basically, they refer to what the project can get or what it can lose. Hope this helps! :)
What is Relation between loss angle and Power factor?
Power factor = cos (angle)PF=cos @
What is the difference between attenuation and insertion loss?
In CATV system, insertion loss define as loss in directional coupler or TAP connector. typically 1 dBuv, while attenuation is generally describe as loss in transmission (splitter).
What is the insertion loss and noise figure of your filter?
insertion loss the loss that occur the insertion of a device in transmit ion line or fiber .
What is the insertion loss of RG 6 cable?
The insertion loss of the RG 6 cable can be computed based on the parameters provided.
What is insertion loss in network analysis?
The Insertion Loss of a line is the ratio of the power received at the end of the line to the power transmitted into the line.
What is the difference between discount and loss?
hi I'm Nivedita.the difference between discount and loss is discount is the reduced price whereas loss means the amount of money lost from the c.p.
What is the difference between the discount rate and the rate of return?
The discount rate is the interest rate used to calculate the present value of future cash flows, while the rate of return is the profit or loss on an investment over a specific period of time.
What are the causes of Insertion loss?
Insertion loss refers to the reduction in signal power resulting from the insertion of a component in a transmission line. Common causes include attenuation due to the material properties of the components, poor connections or mismatched impedances leading to reflections, and additional losses from connectors, cables, or other interfaces. Additionally, factors such as frequency, temperature, and environmental conditions can also contribute to increased insertion loss.
Difference between Profit and loss account and Profit or loss account?
No difference. It is just a matter of symantics (different ways to say the same thing).
What is the difference between 'particular average loss' and 'general average loss'?
both have a slight tinge of "epic"
What is the difference between a dollar return and percentage return?
A dollar return measures the absolute profit or loss from an investment in monetary terms, reflecting the actual amount gained or lost. In contrast, a percentage return expresses this gain or loss as a fraction of the initial investment, allowing for easier comparison across different investments or time periods. While the dollar return provides a specific figure, the percentage return offers a relative measure of performance. Both are useful for assessing investment success, but they serve different purposes in financial analysis.
What does Insertion loss refers to in telecommunications?
Insertion loss in telecommunications refers to the reduction in signal strength that occurs when a device, such as a connector, filter, or switch, is inserted into a transmission line. It is typically expressed in decibels (dB) and quantifies how much power is lost as the signal passes through the device. High insertion loss can negatively impact the performance of a communication system by degrading signal quality and reducing overall system efficiency. Minimizing insertion loss is crucial for maintaining optimal signal integrity and performance in telecommunications networks.
What is the difference between a peril and a hazard?
Peril is cause of loss whereas hazard is condition which arises the chances of loss.
