0
KW is a measure of real power (kilo watts) used. Real power is the power disippated / transformed into heat (in your instance). KVA (kilo volt amperes) is a measure of the vector total of real power and reactive power used. Reactive power is power that is stored and released be certain electrical elements such as capacitors and inductors. A heater inherently has a certain amount of inductance due to the heating wire used, which appears as an inductor to the 60Hz AC voltage applied to it. KW is a useful term because this is how much power you are using. KVA is useful, because this defines the total current draw your heater will have, so wiring and fusing need to be sized accordingly.
What else can I help you with?
What is the difference between PCC panel and PDB panel?
There is no difference between PCC ( Power Control Centre) and PDB (Power Distribution Board). Although they have different names, but their functions are same i.e. controlling power feeders.
What is the difference between ITE and FPE circuit breaker?
The connection blades and how they connect into the distribution panel's bus.
What is the difference between container and panel?
In Java, a Container is an AWT superclass which simply describes any Component class that can contain other Component objects. A Panel is a specific type of Container.
What is fill factor?
Fill factor is the ratio (or the difference) between the actual output of a solar cell or panel, and its theoretical output (which can be about 30%higher).
What is the difference between ATS panel and AMF Panel?
ATS (automatic transfer system panel) it will transfer load from main power to emergency without operation when the power source drop below 80% or normal voltage while AMF (automatic main failure panel) this will substitute as main electricity source and reserve the generator if the main supply fail or down.
What is the difference between a cool touch heater and a mica panel radiator heater?
Cool touch heaters are made of ceramic and aree very safe, while mica radiators are hot to the touch but produce much more heat.
What is a difference between a screen monitor and a panel?
alot
How do you replace bulbs in heater control panel on xsara Picasso?
You can replace the balls in the heater control panel on an XS ARA Picasso by removing the front cover of the heater control panel. The panel lights will then be visible.
What is the difference between a front and rear heater core 1999 Chevy Suburban?
The front heater core is located behind the dash on the passengers side and heats up the front section and the rear heater core is located in the rear located behind the passengers side rear panel and it heats up the rear section..........
What is output voltage of 12v 5watt solar panel?
The output voltage of 12V 5W solar panel is 12V. The current is 0,41667A. These values are normaly calculated with 1000W/m2 of solar radiation.
Difference between organizational culture and climate?
difference in differences uses panel data to measure the differences
What is the difference between PCC panel and PDB panel?
There is no difference between PCC ( Power Control Centre) and PDB (Power Distribution Board). Although they have different names, but their functions are same i.e. controlling power feeders.
How do you change the heater control panel on a Mercedes c180?
To change the heater control panel on a Mercedes C180, remove the radio and the two screws under the CCU panel. Pry off panel and remove the bracket.
Can I connect my Gyeser brand water heater to solar panel and battery?
Yes, if your solar panel and battery system is able to provide the required power that the water heater needs (voltage, current, etc.). If it cannot do that, the water heater won't work. Whether you will also need an inverter between the solar panel and battery system and the water heater is another issue that can only be determined by checking the specification of the water heater (which will be available from any Gyeser Dealer).Note: the name of this company is Gyeser, not Geyser.
How do you replace heater core on a 1994 s-10?
Disconnect the negative battery cable and properly drain the engine cooling system to a level below the heater core.Disconnect the heater hoses from the core tubes near the cowl.The instrument panel must be removed or repositioned for access to the heater core case. Unbolt and either tilt the instrument panel forward or disengage the instrument panel components and remove the panel from the vehicle. In most cases, tilting the panel forward should be sufficient for the necessary access, but if necessary remove the panel refer to in this guide.Unfasten the heater core rear case retaining screws, then remove the rear case for access to the heater core.Loosen the retainers and remove the heater core retaining straps.Remove the heater core and seals.
How do you change a heater core in a 1997 S10?
Disconnect the negative battery cable and properly drain the engine cooling system to a level below the heater core.Disconnect the heater hoses from the core tubes near the cowl.The instrument panel must be removed or repositioned for access to the heater core case. Unbolt and either tilt the instrument panel forward or disengage the instrument panel components and remove the panel from the vehicle. In most cases, tilting the panel forward should be sufficient for the necessary access, but if necessary remove the panel refer to in this guide.Unfasten the heater core rear case retaining screws, then remove the rear case for access to the heater core.Loosen the retainers and remove the heater core retaining straps.Remove the heater core and seals.
What is difference between the HT panel and LT panel?
An LT panel is a device that receives power and distributes it to other devices and boards. An HT panel is the same thing except it is used for high tension cables.
