The fuel sample in the open cup is exposed to air,thereby decreasing it's vapor pressure when compared to the same in a closed cup.
explain the difference between single point & multi point cutting tool
Kirchof's Law - the voltages are measured between the same starting-point and end-point.
For a pure component the density difference between a liquid and gas approaches zero as the critical point is approached. By definition liquid and gaseous phases are indistinguishable (meaning no difference) at the critical point.
'One stores food and the other keeps your house cool!
what is difference between mid-point and bresenhams circle algorithm what is difference between mid-point and bresenhams circle algorithm bresenhams circle algorithm results in a much more smoother circle,comparred to midpoint circle algorithm..In mid point,decision parameter depends on previous decision parameter and corresponding pixels whereas in bresenham decision parameter only depends on previous decision parameter...
The flash point difference between diesel and gasoline is that diesel has a higher flash point than gasoline. Diesel typically has a flash point of around 125-180 degrees Celsius, while gasoline has a flash point of around -40 to -60 degrees Celsius.
The flash point of a substance is the temperature at which it produces enough vapor to ignite briefly when exposed to a flame. The ignition point is the temperature at which the substance will sustain combustion without the need for an external ignition source.
Closed flash point refers to the minimum temperature at which a flammable liquid gives off sufficient vapor to form an ignitable mixture in the presence of an ignition source, under specific test conditions where the container is closed. It is an important safety parameter for handling and storing flammable liquids.
Flash point is the temperature at which a flash will occur across the face of a liquid and go out. Fire point is the temperature at which a flash will occur above the liquid and the resultant fire will continue to burn.
What is the deference between Insertion Point and Pointers?
There is no any such difference between Aniline point and mixed Aniline point . . . . .
The flash point of kerosenes is between 35 0C and 65 0C. The autoignition point of kerosenes is 220 0C.
Autoignition is the temperature at which a substance will ignite without an external ignition source, while flash point is the temperature at which a substance will produce enough vapor to ignite when exposed to an ignition source. In summary, autoignition is spontaneous ignition, while flash point is the temperature at which a substance can ignite when exposed to a flame or spark.
The flash point of diesel is typically around 52-96C, while the flash point of petrol is usually around -45C. The flash point is the temperature at which a substance can ignite when exposed to a flame or spark. A higher flash point, like that of diesel, means it is less flammable and safer to handle compared to petrol, which has a lower flash point and is more flammable. This difference in flash points impacts the safety protocols and precautions needed when handling and storing these fuels.
The flash point of bunker fuel can vary depending on the specific type or grade of fuel being used. Typically, bunker fuel has a flash point between 60-100 degrees Celsius.
between 126 - 204 deg F.
The difference is the length of the vector.