0
What else can I help you with?
Difference between Carnot and ideal cycle?
What is the difference between ideal and actual cycle?
What are four major components of the Rankine cycle?
The four major components of the rankine cycle are as follows: 1. boiler 2. turbine 3. condenser 4. pump i.e. in short (B-T-C-P)
What is the difference between instruction cycle and machine cycle?
an instruction cycle may consist of a number of machine cycles.
What is the difference between an ideal and actual cycle?
fdfv tdfgd trvx
What is super critical technology?
»The supercritical technology is nothing but the thermodynamic where there is no clear distinction between the Water and Steam phase in the Rankine Cycle•Water reaches to steam state at a critical pressure above 22.1 Mpa.
Difference between rankine and brayton cycle?
Brayton cycle: It is open cycle. Rankine cycle: It's close cycle. Brayton cycle: Mostly used in gas turbine engine. Rankine cycle: Mostly used in power generation plant. Brayton cycle: Resemble less to Carnot cycle. Rankine cycle: Resemble is more to Carnot cycle.
What is the difference between the Carnot cycle and the Rankine Cycle?
carnot cycle is a very ideal cycle that isn't practical at all , 'cause we add and reject heat isothermally , a wet mixture enters the turbine so it'll cause pitting and erosion and a wet mixture enters the pump , and the pump can't deal with a 2 phases fluid rankine cycle is a practical cycle but with a very low efficiency so the main difference lies in the adding and rejecting of heat
What are the important parameters in brayton cycle?
The important parameters in Brayton cycle are the pressure ratio between the compressor and turbine, the efficiency of the compressor and turbine, the temperature of the gas at various points in the cycle, and the specific heat ratio of the working fluid. These parameters are crucial in determining the performance and efficiency of the Brayton cycle.
Difference between air refregeration cycle and reversed carnot cycle?
the Carnot cycle has 2 constant specific volume processes (heat in & heat out) the air refrigeration cycle is based on a brayton cycle which has two constant pressure processes.
Compare Brayton and Otto cycle?
The heat addition and rejection processes in otto cycle are of constant volume, whereas in brayton cycle, they are of constant pressure.
What is the difference between a cell cycle and a egg cycle?
the difference between a cell cycle and egg cycle is...
What is modified rankine cycle?
modified rankine cycle basically same as rankine cycle but main difference is inisentropic expansion process.we are nt expanding the styeam completely.steam is expanded up to certain level and after that it dumped in condenser due to high vacuum in condenser.the work losses by restricting the expansion of steam is very less which can be neglected.so that the stroke length of cylinder is reduced and the capitalcost of engine also reduced.engine performance is also good
Difference between Carnot and ideal cycle?
What is the difference between ideal and actual cycle?
What type of cycle used in steam turbine?
Rankine cycle is used in steam turbine
What is rankin cycle?
The Rankine cycle is the fundamental thermodynamic underpinning of the Steam_engine. It is named after William_John_Macquorn_Rankine
What are the relative advantage of Rankine Cycle over Carnot Cycle in thermal power plants?
Rankine cycle allows for practical implementation with real working fluids such as water, making it more feasible for thermal power plants compared to the idealized Carnot cycle. Rankine cycle also allows for the use of turbines and pumps which are more efficient than isothermal expansion and compression processes in the Carnot cycle. Additionally, Rankine cycle can be modified with reheating and regeneration to improve efficiency further, something the Carnot cycle cannot achieve.
Constant pressure cycle used in which engine?
Gas turbine engines and airbreathing jet engines use the Brayton Cycle.
