0
S contains 2 parts portland cement, 1 part hydrated lime and 9 parts sand, and yields maximum flexural strength to fight wind, soil pressure or earthquakes.
Type N is a medium compressive-strength mortar made of 1 part portland cement, 1 part lime and 6 parts sand. Type N is recommended for most exterior, above-grade walls exposed to severe weather, including chimneys.
Type S mortar is recommended for AT grade or below grade exterior applications. Type N is recommended for above grade apps.
What else can I help you with?
What is the difference between backtracking and dynamic programming?
The only difference between dynamic programming and back tracking is DP allows overlapping of sub problems. (fib(n) = fib(n-1)+ fib (n-2)).
What is the difference between isolation transformer and Automatic Voltage Regulator?
n '
What is the difference between n-- and --n in C plus plus statement?
If these expressions are stand-alone (not nested), then they do the same thing, ie increment 'n'.
How is p type semiconductor formed?
p-type or n-type semiconductor alone is of very limited use in chips -- you can only make a thin-film resistor or parallel-plate capacitor with it. You also need the opposite type, the n-type semiconductor, to make junction diodes and MOS or bipolar transistors, which are essential components in an integrated circuit. ================================
What is N-well in VLSI?
An N-well in VLSI is a deep zone of highly N-type doped semiconductor, usually used to create reverse biased isolation junctions between components.
What is better type s or n mortar mix?
The decision of whether type s or n mortar mix is better is determined by the application. N type mortar is used for above grade applications which see harsh weather while S type is used below grade like in ground application.
What is the masonry mortar mix ratio for type N mortar?
Use for non-load application. Mix with sand to produce a mortar for bricks and blocks. Mix proportions by weight for TYPE N Mortar - 10 kg Masonry Cement - 35 kg Sand
What is the best type of mortar to use for laying bricks?
The best type of mortar to use for laying bricks is typically Type N mortar, which is a medium-strength mortar that provides a good balance of strength and workability for bricklaying projects.
What is the ratio for mixing type N mortar?
Two to one
What is the difference of m and n?
the double of n is m. is the difference between m and n
What is the difference between N and N-Channel MOSFETs?
nothing
What is the difference between y values?
n
What the difference between an earthquake and a fault?
n
What type of mortar is best suited for building a stone wall?
Type N mortar is typically the best choice for building a stone wall. It provides a good balance of strength and flexibility, making it suitable for the varying sizes and shapes of stones used in the wall.
Difference between product modulator and balance modulator?
what is the difference between balance n product modulator
What is difference between the n and 2n number?
2n is 2 times n.
Difference between the sum of the squares and the square of the sums of n numbers?
Difference between the sum of the squares and the square of the sums of n numbers?Read more:Difference_between_the_sum_of_the_squares_and_the_square_of_the_sums_of_n_numbers
