0
What else can I help you with?
What is height of a normal towerA type 132 kv up to bottom cross arm?
The height of a standard 132 kV transmission tower typically ranges from 30 to 40 meters (approximately 98 to 131 feet) up to the bottom cross arm. The exact height can vary based on design specifications, local regulations, and environmental factors. The towers are engineered to support the electrical load and withstand wind and other environmental stresses.
What are the prime numbers from 1 to 200?
2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97 101 103 107 109 113 127 131 137 139 149 151 157 163 167 173 179 181 191 193 197 199
Side wall cooling calculation for glass tank furnace?
Typically 1000 cubic feet per minute (per linear running foot of the perimeter at the glass line) of air at a static pressure of 4 inches of water column if the requirement is only for the sidewalls. so for a 6 meter by 14 meter furnace the perimeter would be slightly less than 40 meters (131 feet) so the installed cooling would be 131000 CFM (2 blowers of 65000 CFM) If the crown too is to be cooled a safer calculation would be 1950 cubic feet per minute. It is a trade off. More cooling will give a better life but a lower energy efficiency.
How do you convert the binary value 11000001111111100000000000000000 from IEEE 754-1985 to its decimal equivalent?
To convert 11000001111111100000000000000000 from IEEE 754-1985 to its decimal equivalent, proceed as follows: The most significant bit, bit 31, represents the sign, where 0 denotes positive and 1 denotes negative. So this number is clearly negative. The next 8 bits, from bit 23 to bit 30, represent the exponent. Here we have the value 10000011 which is 131 decimal. However, exponents are biased by 127, thus 131 really means 131-127=3. Thus the exponent is 3. In scientific notation, the exponent tells us how many decimal places to move the decimal point and in what direction. This is no different in binary except we use a binary point instead of a decimal point. Thus an exponent of 3 tells us to move the binary point 3 positions to the right (if it were -3, we'd move three position to the left instead). The remaining 23 bits, from bit 0 to bit 22, represent the mantissa, the fractional component. Here we have 11111100000000000000000. However, a leading 1 bit is always implied so the mantissa is really 24 bits long, with a value of 111111100000000000000000. The binary point is placed to the right of the (implied) leading digit, thus this mantissa has a binary value of 1.11111100000000000000000. Note that the leading 1 bit can always be implied because the digit to the left of the binary point must always be non-zero and the only non-zero digit in binary is 1. The exponent, 3, tells us to move the binary point 3 positions to the right, so we now have 1111.11100000000000000000. We can ignore the trailing zeroes so we now have a binary fraction of 1111.111. Converting floating point binary values to decimal values is no different to converting integer values where every bit position represents some power of 2. Those to the left of the binary point represent increasing powers of 2 starting with 2^0, just as they do in integer conversions. Those to the right represent decreasing powers of 2, starting with 2^-1 (which is 0.5 in decimal). Thus, working from left to right we have: 1 x 2^3 = 8 1 x 2^2 = 4 1 x 2^1 = 2 1 x 2^0 = 1 binary point 1 x 2^-1 = 0.5 1 x 2^-2 = 0.25 1 x 2^-3 = 0.125 Adding these up we get the decimal value 15.857. However, the sign bit indicated the value was negative, so the value is -15.857. Thus 11000001111111100000000000000000 in IEEE 754-185 represents -15.857 in decimal.
The binary number 11 would have a decimel equivelent of?
It depends. If you are using unsigned numbers, then the following assumption is made: 0b11 = 0b00000011, in which case the answer is; 2^1 + 2^0 = 2 + 1 = 3 If you are using signed numbers, than a binary number in the form 0b11 would be interpreted as negative because the leading bit is equal to 1. For signed numbers, the '1' in the leading bit is extended, thus: 0b11 = 0b11111111 In order to interpret this number, negate the number by flipping the bits and adding 1: 0b11111111 0b00000000 (bits flipped) 0b00000001 (added one) The positive representation of 0b11111111 is equal to 0b00000001, which is equal to 1, thus 0b11 = 0b11111111 = -1
What is the difference between 79 and 131?
52
What is the difference between 131 and 29?
94
What is the difference between a 131 paragraph and a 131 essay?
A 131 paragraph is typically a paragraph with 131 words, while a 131 essay is an essay that consists of 131 words in total. The main difference lies in the scope and structure of the content - a paragraph focuses on a specific topic within an essay, which is a formal piece of writing that presents an argument or explores a theme in more detail.
How far is Galway from Mullingar?
About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.About 81 kilometres or 131 miles is the distance between Galway city and Mullingar.
How many odd number between 120 and 131?
5. "Between" implies that 131 is not included.
What is the percentage increase from 115 to 131?
Start: 115, End: 131 Difference = +16 Percentage = Difference ÷ Start x 100% = +16/115 x 100% = +13.9%
What is the decay mode in iodine-131?
Iodine-131 decays through beta decay by emitting a beta particle and a gamma ray. This process transforms a neutron in the iodine-131 nucleus into a proton, resulting in the formation of xenon-131.
What is the sum of all prime number between 40 and 50?
The prime numbers between 40 and 50 are 41, 43, 47. So their sum is 131.
When an iodine 131 atom decays by emitting a beta particle and a gamma particle it forms?
When an iodine-131 atom decays by emitting a beta particle and a gamma particle, it forms xenon-131. The beta particle is an electron, while the gamma particle is a high-energy photon. This decay process helps iodine-131 become a stable element, xenon-131.
What is the difference between the samick piano model su-131 and the samick piano model su-147s?
The primary difference between the Samick piano model SU-131 and the SU-147S lies in their size and soundboard dimensions. The SU-147S is a larger upright piano, typically offering a deeper tone and more resonance due to its extended height and larger soundboard area. In contrast, the SU-131 is more compact, making it a suitable option for smaller spaces while still providing a quality sound. Additionally, the SU-147S may feature upgraded materials or construction techniques, enhancing its overall performance compared to the SU-131.
What is the only prime number between 113 and 131?
127.
How many multiple of 131 are in between 1 and 100000?
763 of them.
