If its small insert piece, it should be 300 mm as IACS standard.
The only difference between the two is that projection welding requires preparation of the joint members in the way of adding a preformed dimple or projection. Spot welding is used without such preparation to the joint members. it's just heat and pressure.
seam welding is a process that produces a weld at the faying surfaces of two similar metals where its used depends on which metal you look to weld
The two factors that determine the size of a lathe are the "swing" and "distance between centers". The swing of a lathe is the length measured from the center of the hollow spindle or chuck to the nearest part of the bed multiplied by two. Distance between centers is the distance measured between the chuck and tail stock.
The "distance" or similarity between the allelic frequency of two separate populations. *Usually the two populations are separated over a significant geographic distance.
effective Distance between the two points or we can say two stations.....
A hem creates a seam. A seam is the intersection between two pieces of cloth or two parts of the same piece of cloth.
The horizontal seam between two panel siding loads should have what flashing?
A seam is where two or more bits of cloth are overlapped. A seam consists of cloth.
Seam.
The seam is simply the name of the line that is created when two pieces of fabric are joined together. If you are sewing any two pieces together, the place where they are joined is called the seam. Maybe you are wondering about the seam allowance, which is the amount of fabric alloted to sewing the pieces together. The seam allowance is the distance from the edge you put your line of sewing. In many fabrics that allowance can be very small, but some fabrics require a larger allowance to minimize fraying.
lengthThe distance between two points is called the displacement.
The only difference between the two is that projection welding requires preparation of the joint members in the way of adding a preformed dimple or projection. Spot welding is used without such preparation to the joint members. it's just heat and pressure.
An open seam is a general purpose seam. An open seam is two pieces of fabric sewn together, and then the seam allowances are pressed open, creating a flat and clean seam line on the right side of the fabric.
Inconspicuous means hard to detect or see. A seam is a join between two pieces of fabric, metal, wood, leather or other substance produced in flat sheets.
the distance between the two cities is 15km
A seam is made when two or more layers of fabric are stitched together.
the distance between two adjacent compressions is called the wavelength