The frequency limit of copper wire is generally around 1 GHz for typical applications, but it can vary depending on factors such as wire diameter, insulation type, and the specific application. At higher frequencies, signal loss due to skin effect and dielectric losses increases, which can limit effective transmission. For specialized applications like RF and microwave communications, techniques such as using coaxial cables or twisted pairs can help mitigate these losses. However, for very high frequencies, alternatives like fiber optics are often preferred due to their superior performance.
You need a copper wire and magnets. put magnet on plus side of battery and then form the copper wire around it.
Yes, copper wire is a conductive element and is the most addiquite substance for distribution of electricity known.
copper
The main difference is in the price. Oxygen-free copper is sold to people with plenty of money for loudspeaker wire, but provided the wire has less resistance than one tenth of the speaker resistance (usually 4 or 8 ohms), the resistance of the wire is immaterial, and ordinary copper wire is perfectly all right. Highly refined copper has about 1% better conductivity than the usual variety. That difference in conductivity is insignificant for audio use and is also produced by a 3 degree C temperature rise in copper.
ETP is 99.5%+ pure copper that is very low in oxygen content it is the most common wire used for transformers Silver content in the wire is consider copper for purity analysis
20 Amp
whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet
They are both good conductors, but copper is better than aluminium, and sufficently ductile to easily make wire out of them.
how much copper is in copper wire
No. Copper wire is a solid
No.. Copper wire isn't
No, copper wire is not magnetic.
Metal containing at least 99.85 percent by weight of copper, or by weight of any other element does not exceed the limit specified.
Copper wire sent for recycling is remelted and rerefined. It becomes a new copper product one of which might be new copper wire.
If you mean a bare copper wire, that is the "ground" wire.
Yes, if it is not an insulated wire. If it is bare copper it is always ground. But the hot and neutral wire are also copper, they are just insulated.
To refine copper wire scrap, you need professional tools and equipment such as copper stripper which is used for removing insulation from copper wire.