answersLogoWhite

0

The front airbag deployment sequence required by law generally involves the airbags being designed to deploy in a specific order based on the severity and type of collision. Typically, the driver's airbag deploys first, followed by the passenger airbag, in frontal impacts. The deployment is triggered by sensors that detect the force of the impact and the position of the occupants. Compliance with these standards is mandated by safety regulations to ensure maximum protection for vehicle occupants.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Continue Learning about Engineering

What is the ideal degree of slope of a vehicle ramp?

Taking a thin length of wood or similar, place end of wood to the front inside of the front tyre where it meets the floor. Lift wood until it is just below bottom of front skirt or whatever is the lowest point on the vehicle in front of the wheel. Hold in this position and measure the angle of the bottom of the wood to the floor. This is done at the front inside of the tyre. Calculate height required and length required of ramp to maintain this angle. This is the ideal slope for the ramp.


What is FIFO approach?

FIFO is the acronym for First In First Out, which means Use (or do) the Oldest Stuff First, or use things in the order of their arrival. Two common contexts for this are in accounting and computing. FIFO is also used in inventory and in stocking shelves where the items that are received first should be used first and old items are shelved in front and new items in the back. It is a materials management technique in Warehousing, Fruit & Vegetable stores, Butcher shops, etc. and handling incoming mail in offices. It is all about making sure things flow through a system properly, where older items are used before items that have just come in. Technically, FIFO is a means of describing a queue-like data sequence, where insertions (push operations) occur at the end of the sequence and extractions (pop operations) occur at the beginning of the sequence. As opposed to a LIFO (last-in, first-out) sequence where all pushes and pops occur at the end of the sequence, thus creating a stack-like data sequence. LIFO can also be called FILO (first-in, last-out), which means the same thing. In other words, with FIFO, we pop objects off the sequence in the same order they were pushed onto it, but with LIFO/FILO we pop objects in the reverse order they were pushed.


How do you remove an embedded backing of an earring inside your earlobe?

Ice the front and back of the ear lobe to reduce the swelling which will allow the removal of the back of the earring. If this does not enable removal, then the skin may have grown around the backing and removal under local anesthesia may be required by a physician.


What is a front door attack in java?

What is a front door attack


Why is the operation pop in the data structure stack called pop?

It stems from the analogy of a plate-stacker. That is; a recessed pit with a spring-loaded platform that pushes upwards. As plates are stacked onto the platform, the spring is compressed by the weight of the plates, pushing the platform down into the pit so only the top plate protrudes from the pit. When the top plate is removed, the stack pops up to expose the next plate. The push and pop verbs apply to all linear sequence containers where a new element can be added at the front and/or back ends of the sequence, such as arrays/vectors, lists, queues and stacks.

Related Questions

How do you remove Saturn Ion front airbag?

To remove the front airbag from a Saturn Ion, first, disconnect the negative battery cable to prevent accidental deployment. Next, remove the steering wheel cover by unscrewing the retaining screws and carefully prying it off. Disconnect the airbag module connectors and unbolt the airbag from the steering wheel. Always handle the airbag with care and follow safety precautions, as it is a sensitive component.


Where are the front airbag sensors on a 2006 Mitsubishi eclipse?

In a 2006 Mitsubishi Eclipse, the front airbag sensors are typically located in the front bumper area, near the frame or subframe of the vehicle. There may also be additional sensors mounted on or around the steering column and under the dashboard. It's important to consult the vehicle's service manual for precise locations and details regarding the airbag system. Always take caution when working with airbag components to avoid accidental deployment.


Where is the airbag sensor on a 2006 Saturn?

In a 2006 Saturn, the airbag sensor is typically located under the front seats or within the dashboard, depending on the specific model. It is designed to detect a collision and trigger the airbag deployment. For precise location details, it's advisable to consult the vehicle's service manual or a professional mechanic.


What is a passenger airbag cutoff?

A passenger airbag cutoff is a safety feature in vehicles that allows the driver to disable the passenger side airbag, typically when a child seat is installed in the front passenger seat. This is important because airbags can pose a risk to smaller occupants in the event of deployment. The cutoff switch is usually located on the dashboard or in the glove compartment, and it ensures that the airbag will not deploy in an accident when turned off. This feature enhances safety for children riding in the front seat while still allowing the airbag to function normally for adult passengers.


How old do you have to be to sit in the front seat of the car in Massachusetts?

Children must be at least 13 years old to ride in the front seat of a car in Massachusetts, according to state law. This measure is in place to ensure their safety in case of an airbag deployment.


Do I need to change front impact sensor on a 2000 Tahoe after bag deplored?

Yes, it's advisable to replace the front impact sensor on a 2000 Tahoe after the airbag has deployed. The sensor may be damaged or malfunctioning due to the deployment, which can affect the vehicle's airbag system in the future. It's important to ensure that all components of the airbag system are functioning properly for safety. Always consult a professional mechanic for a thorough inspection and replacement if needed.


What do you do if you have a child in the front seat and there is airbags?

Disable the passenger-size airbag. If there is no way to disable the passenger airbag, the only safe thing is to belt them in the back seat -- which is safer, and required by law in most states anyway.


What is New Hampshire law about children ridding in front seat?

In New Hampshire, children under the age of 13 are not allowed to ride in the front seat of a vehicle. It is recommended that children under 13 ride in the back seat to minimize the risk of injury from airbag deployment in case of a crash.


Can you sit in front seat when you are 7?

It is not an age restiction. It is a height/weight restriction for saftey from the passenger side airbag. 50 lbs and no booster seat is what is required.


Where is the front airbag sensor located on the Honda Accord 2003 V6?

Where is the front airbag sensor located on the Honda Accord V6 2003


What is the weight limit for a child riding in the front seat of a car with an airbag?

If a child is to sit in the front of a car with an airbag, they MUST BE 80 POUNDS!!


How can you make sure the passenger air bag is always on on your 2004 Liberty?

The front passenger seat has a sensor built into it and is always on unless a weight between 9 and 45lbs (maybe slightly different) is placed on the seat. This is in case you put a child safety seat on the front passenger seat so as not to deploy the airbag in a collision. The sensor is also intelligent and will vary the deployment depending on how heavy the front passenger is so as to minimize any injury the airbag could cause.