0
What else can I help you with?
What are pdms piping modeling commands?
There are many PDMS piping modeling commands. Some of these include: Q axes at ph= to check the head of the branch of the pipe, Q axes at pt= to check the tail of the branch of the pipe, Q Hstu= to show the branch head tube attribute, and Q Lstu= to show the branch tail tube attribute.
What is deifference between GRE pipe and RTR pipe?
RTR Pipe(Reinforced Thermosetting Resin pipe) is a kind of composite thermosetting plastic pipe,combing Resin with Fiberglass Roving.In fact,the RTR pipe have a more approperiate name as GRE(Glass Reinforced Epoxy) Pipe, since that uses Epoxy Resin instead of Polyester.GRE Pipe have much superior properties than common RTR Pipe, especially in properties of high pressure resistant.
What is the difference between flow tee and bar tee in piping design?
Bar Tee has got the branch opening closed with flat Bars so as not to allow the PIG to pass through the branch pipe portion than to the mainline. In case of Flow Tee the purpose is the same (i.e. not to allow PIG passage), here the flowing liquid get accumulated in the circumference of the annular space and while pig moves thru' flow tee, maximum fluid is passed on to the branch piping.
What is a GRV pipe?
Grv glass reinforced vent
What is the difference between RTP pipe and RTR pipe?
RTP (Reinforced Thermoplastic Pipe) and RTR (Reinforced Thermosetting Resin Pipe) differ primarily in their materials and applications. RTP is made from thermoplastic materials that are reinforced with fibers, offering flexibility and resistance to corrosion, making it suitable for transporting fluids in various industries. In contrast, RTR is composed of thermosetting resins reinforced with materials like fiberglass, providing higher temperature and pressure resistance, which makes it ideal for applications like chemical and wastewater transportation. Ultimately, the choice between RTP and RTR depends on the specific requirements of the application, including temperature, pressure, and chemical exposure.
What is the difference between piping and pipe?
pipe = one piping = a system of piping arrangements
What are pdms piping modeling commands?
There are many PDMS piping modeling commands. Some of these include: Q axes at ph= to check the head of the branch of the pipe, Q axes at pt= to check the tail of the branch of the pipe, Q Hstu= to show the branch head tube attribute, and Q Lstu= to show the branch tail tube attribute.
What is rtr pipe?
Reinforced Thermosetting Resin Plastic (RTRP) Pipe.
What is the full form gre pipe?
GRE Pipe - Glass Reinforced Epoxy Pipe
What is piping specification a1a d2a?
d2a is a pipe class and a1a is the piping materials
Piping system?
Pipe Expansion Joint
What does B.O.P. stand for in piping?
For horizontal run pipe it is Bottom of Pipe For vertical run Pipe it is back of pipe
What is the difference brwteen a weldolet and a pipet?
Weldolet is a trademarked name by Bonney Forge for internally reinforced forged branch outlet fittings. Pipet is a trademarked name by WFI for internally reinforced forged branch outlet fittings. Both comply with MSS SP-97 Internally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends. Referenced in ASME B31.3-2020 304.3.1 a) (1). They are the same
Difference between weldolet and sockolet in piping?
Weldolet has a Bevelled end to butt weld the pipe whereas in sockolet the pipe/tube goes inside it and there it is fillet welded.
What is deifference between GRE pipe and RTR pipe?
RTR Pipe(Reinforced Thermosetting Resin pipe) is a kind of composite thermosetting plastic pipe,combing Resin with Fiberglass Roving.In fact,the RTR pipe have a more approperiate name as GRE(Glass Reinforced Epoxy) Pipe, since that uses Epoxy Resin instead of Polyester.GRE Pipe have much superior properties than common RTR Pipe, especially in properties of high pressure resistant.
Can you tapped the piping of floor drain to a water closet pipe line?
Yes, be sure to pipe floor drain line properly into water closet piping.
What is stub in and stub on branch in piping?
For branching of one size lesser of run pipe, Stub On is preferred. For other branching less than one size of run pipe, Stub In is preferred. The design is based on ASME B31.3
