0
magnetisation characteristic of dc generator is nothing but the open circuit characteristic of dc generator where we determine the operating characteristics of dc machines.it is used to determine the open circuit armature voltage keeping armature current zero,at rated speed and after few laps of time filed current is gonig to be raised from zero.where the armature open circuit voltage is reached above its rated value.
'
What else can I help you with?
What is the important of brush in DC machine?
The slip rings are the most important brush in DC machine.
What is swinburne's test of DC shunt motor?
swinburne's test on dc shunt machine is to predetermine the efficiency of the dc machine , but it is not accurate it is just like estimation of efficiency of dc shunt machine when it is run as a motor and a generator............................
How many types of DC machine?
05 types of dc machines
In dc machine why one is required to vary the field current in only one direction while performing the open circuit test in dc machine?
In a DC machine, the open circuit test is performed to determine the no-load characteristics, such as the magnetization curve. Varying the field current in only one direction ensures that the magnetic field strength increases consistently, allowing for a clear relationship between field current and generated voltage. This prevents any confusion or complications that may arise from negative or reverse magnetic fields, which could lead to inaccuracies in the test results. Thus, maintaining a unidirectional field current helps in obtaining reliable data for analysis.
What component of a welding machine changes AC current to DC current?
Yes, it is normal for a welding machine to convert AC voltage to a DC voltage.
What is the use of magnetization curve of DC shunt generator?
The armature voltage is a critical parameter in the determination of performance characteristics for the DC machine. The armature voltage has been shown to be proportional to the magnetic flux density per pole and the armature speed. Thus, the armature voltage will also exhibit nonlinear behavior when saturation occurs. The analysis of DC machine performance typically requires that the characteristics of the armature voltage saturation be known. This information is typically provided in a plot of the armature voltage vs. field current (magnetization curve) for a given operating speed
What are the characteristic of hard materials?
After magnetization, they remain magnetic due to high levels of Br and Hc.
What motor is NOT suitable for use as a DC machine?
What motor is NOT suitable for use as a DC machine?
What is the important of brush in DC machine?
The slip rings are the most important brush in DC machine.
What is swinburne's test of DC shunt motor?
swinburne's test on dc shunt machine is to predetermine the efficiency of the dc machine , but it is not accurate it is just like estimation of efficiency of dc shunt machine when it is run as a motor and a generator............................
What is an dc meachine?
it is a machine which operates on the dc power source.
How many types of DC machine?
05 types of dc machines
Derive emf equation of a DC machine?
equation of ac machine
How do you make DC generator?
A DC generator is a DC machine that is driven by an external rotating force. It is constructed the same as a DC motor.
Whether a pmbldc motor is a dc or ac motor?
PMBLDC machine is actually an ac machine and due to power electronics components it's output is dc ,so therefor it is called 'dc'
In dc machine why one is required to vary the field current in only one direction while performing the open circuit test in dc machine?
In a DC machine, the open circuit test is performed to determine the no-load characteristics, such as the magnetization curve. Varying the field current in only one direction ensures that the magnetic field strength increases consistently, allowing for a clear relationship between field current and generated voltage. This prevents any confusion or complications that may arise from negative or reverse magnetic fields, which could lead to inaccuracies in the test results. Thus, maintaining a unidirectional field current helps in obtaining reliable data for analysis.
Can you Use d c current to magnetize?
yes. dc is used for magnetization. for instance in magnetic relays.. and in other many devices... you can make a search on the web for more.
