0
What else can I help you with?
How can rubble be recycled for new projects?
Smaller pieces of concrete are used as gravel for new construction projects. Sub-base gravel is laid down as the lowest layer in a road, with fresh concrete or asphalt poured over it.
Are there any differences in hardwood flooring and engineered flooring?
Natural hardwood flooring is a higher quality flooring, generally more expensive, and can have some restrictions in where it can be laid. Engineered flooring is made to look genuine, but it is a cheaper material with only a veneer glued on to look genuine, but it is much cheaper.
Why should large concrete slabs be laid with expansion joints so that they are not touching?
Large concrete slabs should be laid with expansion joints to accommodate the natural expansion and contraction of the material due to temperature fluctuations. Without these joints, the slabs can experience cracking, warping, or buckling as they shift. Expansion joints allow for movement while maintaining structural integrity, ensuring the longevity and functionality of the concrete surface. This practice minimizes maintenance costs and enhances safety by preventing surface failure.
Is there any flooring that can be laid on top of carpet?
Sawdust
How do you handle hydraulic torque wrench on fastening bolts?
When it comes to tightening bolts, there is a specific measure for bolts. You need to go through the manual. There is a spring laid in the handle as when the wrench reaches the particular limit, that could bend proportionally. Thus, the worker should stop when it reaches the particular limit.
When a material is lad down what is it called?
laid
Why should acetylene tanks never be used while laying on there sides?
They are not hollow- they are filled with a spongy material that is saturated with liquid acetone. When the acetylene is pumped into the tank, it dissolves in the acetone, much like CO2 dissolving in a bottle of soda. If the tanks are laid on their sides, the acetone will be forced out into the hoses and torch. You will get a strange flame with a lot of excess carbon. Tanks that have been laid down should be stood up, and left in that position for at least an hour so that the acetone moves back towards the bottom of the spongy material.
The process in which material is dropped or laid down?
depositation
Process in which material is laid down?
Deposition is the process in which material is laid down or deposited by natural processes such as sedimentation or precipitation. This can occur in bodies of water, on land, or through the accumulation of volcanic ash and other materials.
What is the term used to describe material being laid down in an area?
The term used to describe material being laid down in an area is "deposition." This can refer to the process of sediments settling or accumulating in a specific location, such as in a riverbed or on the ocean floor.
Is it you laid down or laid down?
laid down Neither - it's lay, the past tense of to lie.
The process in which material is laid down?
The process by which material is deposited or laid down is called sedimentation. This can occur through various mechanisms such as erosion, weathering, and transportation, leading to the accumulation of sediments in a particular location over time. These sediments can eventually undergo processes like compaction and cementation to form sedimentary rocks.
Which is correct lay down or laid down in bed?
"Lay down" is the correct phrase to use in this context, as it refers to the act of reclining or resting in a horizontal position. For past tense, you would use "laid down," as in "I laid down in bed."
How do you used laid down in sentence?
Sure! Here's an example sentence using "laid down": "After a long day at work, I laid down on the couch to relax."
Which gas cylinder should never lay on its side?
Acetylene gas cylinders should never be laid on their side. This is because acetylene is dissolved in acetone or another solvent under pressure, and if the cylinder is horizontal, the solvent can be released along with the gas, posing a significant safety hazard. Always store acetylene cylinders upright to ensure safe handling and usage.
How do you say lay down in past tense?
The past tense of "lay down" is "laid down."
What can be made laid down bent and broken although it's difficult to touch them?
Rules, laws, or guidelines can be made, laid down, bent, and broken. Although intangible, they govern behavior and can be manipulated or violated.
