answersLogoWhite

0

The minimum depth for underground pipes beneath a concrete slab generally ranges from 12 to 18 inches, depending on local building codes and climate conditions. This depth helps protect the pipes from freezing temperatures and minimizes the risk of damage from the weight of the concrete. Always consult local regulations and a professional for specific requirements in your area.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

How many yards of concrete fo 100ftby2ftby10ft?

If the depth is two feet, the minimum yards needed is 74.07.


What are the recommended specifications for installing concrete piers for a house foundation?

The recommended specifications for installing concrete piers for a house foundation include using a minimum diameter of 12 inches, a minimum depth of 4 feet, and spacing them no more than 6 feet apart. Additionally, the concrete mix should have a minimum strength of 3,000 psi and be reinforced with steel rebar. It is also important to ensure proper drainage and soil compaction before installing the piers.


How many yards of concrete to do 16x24?

For a 16' x 24' slab with a depth of 4", you would need a minimum of 4.74 cubic yards.


How thick should concrete walls be to hold 10000 gallons of water?

It depends on the depth of the water. The hydrostatic pressure increases with depth.


What is the recommended concrete depth for a driveway?

The recommended concrete depth for a driveway is typically 4 inches.


What is the significance of the frost line map in the USA for determining the depth at which underground pipes should be buried to prevent freezing?

The frost line map in the USA is important for determining how deep underground pipes should be buried to prevent freezing. This map shows the depth at which the ground freezes in different regions, helping builders and engineers know the minimum depth at which pipes should be buried to avoid damage from freezing temperatures. By following the frost line map, they can ensure that the pipes are buried deep enough to prevent freezing and maintain proper functionality.


How many yards of concrete for 2400 sq feet?

Assuming you use the standard depth of four inches, you'll need a minimum of 29.63 cubic yards.


How much Concrete do you need for a 22 squared slab?

A 22x22 foot slab at a 4-inch thickness/depth requires a minimum of 6 cubic yards.


At what depth should the reinforcing be placed in a concrete garage floor supported by a concrete wall on all four sides and poured on compacted fill?

Steel re-inforcing in concrete should always be placed 1/3 of the depth from the bottom. A 6" thick slab would have the steel placed 2" off the bottom.


Tyres should be replaced when the depth tread is reduced to about?

The Legal minimum thread depth is 2/32". But should be replaced if under 4/32" in spite of the legal minimums.


Can you give me a good sentence for underground?

A spirit raised from depth of underground.


What factors should be considered when determining the appropriate depth of a concrete driveway?

When determining the appropriate depth of a concrete driveway, factors to consider include the weight and frequency of vehicles using the driveway, soil conditions, climate, and local building codes.