fuse
fuse
A device that opens a circuit by melting is called a fuse.
That would either be a fuse or my screwdriver. Let's go with fuse.
That would be a piece of fuse wire.
fuse
An electrical tester is tool used to check if a wire is producing an electrical current. Usually you will just hold it to the end of a wire, if an electrical current is being "induced" a light will glow on the tester, this is a live wire.
trancestor
safest is oblivously good quality cordless tools, but failing that 110 volt hand tools is the voltage permitted on Irish building sites.......
Fish tape is a tool that electricians use to pull wire through a pipe or tube. This website talks more about it: http://electrical.about.com/od/electricaltools/a/fishtape.htm
An odometer.
fuse
capacitors
There is a tool that plugs into a outlet that will test for that. There is one that will check for open ground in light fixtures and fans as well. That one is a little pricey... Check with your local electrical supply store.
A multimeter is a crucial tool for technicians as it allows them to measure voltage, current, and resistance in electrical circuits. This tool helps diagnose and troubleshoot electrical issues in a variety of equipment and systems.
Opensta- is a open source tool and there is no license for the tool load runner is a licensed tool and more secured
When soldering a person can use an electric tool or a torch. The torch uses a flame, while an electrical tool has a soldering tip which is heated.
A crows foot tool is the open end of a open end wrench formed into a socket.
if the motor is bad or it's an electrical problem you can remove motor and crank shut manually, not sure what kind of tool you might need
a test lamp i literrally a bulb connected to two wires. it was used to check if you had any current or voltage in a circuit. you would just take the build with the two wires and touch it with the curcuit. if the bulb lights up means that you have a complete circuit if not it means that the curcuit is working. The test lamp is like a medival tool to a multimeter
It is simply called a 'hive tool'.
A cicuit. -Hong Nguyen
It is a conductivity tester!