for protection from initial currents and short circuit,overload currents
Further ExplanationWhen a motor is stationary, the only opposition to current flow is the resistance of its windings. When the motor starts to turn, it generates a back emf. So, on starting, the current is high, and it reduces in value as the machine runs up to speed. With larger motors the starting current could overheat and damage the windings, so it is necessary to restrict the value of the starting current using a 'starter'.
electrostatic capacitor
Well for starters you could spin it up to speed and then put your tongue on it, that would show you one possibility.
It's one piece but they have different diameters if it doesn't match up with your starter you may be able to get a starter to match with is easier to change. Example 350 400 Chevy takes different starters and flywheels although they make starters that will fit both depending on which holes you use to mount starter to block.
the starting current of motors can be controlled by using an additional resistance in the beginning and gradually decreasing it.Motor starters do the same
Inspect all motor labels and see if they are dual voltage motors. If they are, they should have a label on them telling you how to convert the motors for 480 volt. This is a relative simple task. Converting to 480 volts will lower the motor current to half of the 230 volt rating, so you will have to change the overload heaters in the individual motor starters. You need to do this to protect the motors in case of overloading. Last the control transformer will need to be reconnected for 480 volt.
An MD for starters.
To obtain all three starters you need to trade with someone.
Solder. You'll need a soldering iron, for starters.
Well for starters you need shelter.
You need a game sharkYou need a game shark you can also get them from emerald but you have to complete the pokedex in emerald to get oe of the three starters from pro. berch
You can't. You'll need to trade for them.
Well for starters, you need a action replay.
No. You will need to transfer them over from an older game.
No, you will not get all 3 Starters in Pokémon Black 2, you will only be allowed to choose 1 Starter out of Tepig, Snivy and Oshawott and you will need to trade in order to get the other 2 Starters.
She is one of the starters so you don't need to unlock her
no but you can get the kanto starters (bulbasaur charmander squirtle) and the hoenn starters (treecko torchic mudkip) but you need to get all 16 badges
For starters, you need to legitimize your vocabulary - "EXPOTENTIALLY" is not a word. Try again.