0
I am in school with maddy R
What else can I help you with?
What is the meaning of end suction of pump?
A single suction pump having its suction nozzle on the opposite side of the casing from the stuffing box and having the face of the suction nozzle perpendicular to the longitudinal axis of the shaft
Why flat side up reducer is used at pump suction?
To compensate high suction volume during startup of he pump. the reducer area below the pipeline at the suction stores excess volume of fluid.
Where is suction and discharge s?
Answer: The terms suction and discharge are the terms refer to hydraulics. In hydraulics if the the liquid has to be lifted or pumped to the usage area the hydraulic pump will be used . This pump will have to functions that is first suction to lift the fluid and the discharge or delivery . The familiar words in pair are lift and discharge; suction and discharge. The specification of pump for these terms are suction head and discharge head.AnswerThe suction pressure refers to the pressure of the referigerant being "sucked" back into the compressor. The suction pressure is a critical variable in ensuring the accuracy of the refrigerant charge, along with the tepmerature of that line as well. The "superheat", or heat added to the vapor in that line can be monitored in this manner.You have not mention which suction pressure... Actually Where ever the suction is presented that pressure is called suction pressure.... and suction pressure in practical cases normally always less that atmospheric pressure and in case of delivery pressure it is oppositeSaying that suction pressure is " the pressure of the referigerant being "sucked" back into the compressor " is not accurate.Simply , the suction pressure of a pump is the absolute pressure of a fluid , measured at the inlet of the pump ( in your answer , the pump is the compressor , and the fluid is whatever refrigerant. )The discharge pressure , is the absolute pressure of the liquid measured at the outlet of the pump.Obviously, the discharge pressure is usually bigger than suction pressure.
What is the function of a suction and discharge strainer?
Suction strainers offer front-line fluid filtration in the tank, used to prevent large particles of sediment, sewage, mud, or solids from entering suction port of drainage pumps.
Is the suction line the high side?
No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.
What is the purpose of suction machine?
A suction machine such as an aspirator can be used to remove mucous and other unwanted fluids.
What is the purpose of suction filter?
I am in school with maddy R
What is a purpose vacuum cleaner?
To suction the dirt out of your carpet
Types of suction items?
Types of suction items are suction cups, suction hooks, and suction hoses.
How do you quailify for refrigerant recovery epa certification?
A suction line filter is added to the system for a different purpose than the liquid line dryer. A suction line filter is added:A : to keep acidic oil in the system from working its way back into the new compressor.B because the suction makes the acid removal better.C because the suction line is cold and full of acid.D all of the above.
What is the purpose of a toilet vent in a plumbing system?
The purpose of a toilet vent in a plumbing system is to allow air to enter the pipes, preventing suction and ensuring proper drainage and flow of waste and water.
What is the purpose of plumbing vents in a building's drainage system?
The purpose of plumbing vents in a building's drainage system is to allow air to enter the pipes, preventing suction and ensuring proper drainage flow.
What is suction machine?
The opposite of a compressor. A vacumn cleaner is a suction device. Were you ever on a baby bottle. You used suction to get the formular out of there. A suction machine sucks!
What are Terms used to describe a soft suction catheter?
Soft suction catheters may also be referred to as flexible suction catheters or malleable suction catheters.
What is the purpose of a plumbing stack vent in a building's drainage system?
The purpose of a plumbing stack vent in a building's drainage system is to allow air to enter the plumbing system, preventing suction and ensuring proper drainage flow.
What is the purpose of the external equalizer on a TXV?
The purpose of the External equalizer on the TXV is to compensate for the pressure drop in the evaporator coil , This is done since the superheat calculation is based on the difference in the Saturation temperature corresponding to the Suction pressure (Measured after the coil) and the actual suction line temperature. Now, in a TXV measurement of actual line temperature is accomplished by using the Sensing Bulb and the Measurement of the Suction pressure by the External Equalizer of the TXV. The opening/Closing of the Expansion valve is controlled by the setting of the superheat which is governed by the setting of the Spring.
What is the brief history of suction machine?
history of suction macine
