0
Well first of all..
You want heat in your house when it's cold, RIGHT? So you turn on the heater with the knob.. and the heat comes out of the vents. No vents = explosion.
And basically.. no vents as I said.. explosion, because the gas has nowhere to go so the pressure will build up and BOOM.. flames.
What else can I help you with?
Is there a high wind vent cap for a gas furnace roof vent?
Yes you can get a high wind cap for the vent.
Why does a toilet need a vent?
gas gets trapped in the drainage system if you don't vent it (and you don't want that gas coming back into the bathroom)
What is the purpose of a high point vent during hydro testing?
to bleed the air out of the system
What is the difference between an c vent and a b vent?
A C vent, or Category C vent, is typically used for appliances that operate with natural draft and do not require a fan to expel combustion gases, such as certain types of gas fireplaces. In contrast, a B vent, or Category B vent, is designed for venting appliances that produce flue gases at lower temperatures, often with a natural draft, and is commonly used for gas water heaters and furnaces. The primary difference lies in their design and application based on the temperature and type of appliance they serve.
What is the difference between a stack vent and a vent stack?
A stack vent is is the extension of a soil or waste stack above the highest horizontal drain connected to the plumbing stack Vent stack a vertical vent pipe extending through more then two stories which is then connected to a stck vent or is otherwise extended throgh the roof, installed primarily for the purpose of providing circulation of air to and away from any part of the drainage system
What is the purpose of the vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What the purpose of the vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What is the purpose of a vent on a gas furnace?
The purpose of the vent on the furnace is to ventilate flue gases out side of the house.
What is the purpose of air vent in infrastructure pipe work?
The purpose of air vent on pipe works of infrastrucure
What is the recommended diameter for a vent pipe when installing a 6" vent for a gas fireplace?
The recommended diameter for a vent pipe when installing a 6" vent for a gas fireplace is typically 6 inches.
What is the purpose of the vent above the door?
The purpose of the vent above the door is to allow air to circulate and maintain proper ventilation in the room.
What is the purpose of a vent cover?
Vent covers are manufactured in many different sizes to be able to fit all vents. The purpose of a vent cover is to protect a vent from allowing rain to enter, while still allowing air to circulate.
You are interested in purchasing a house built in 1950 it has a furnance vent that you suspect is asbestos should it be removed or just sealed up?
If it is in good condition, it can be left alone. If it is deteriorating, it should be removed.
Is there a highwind vent cap for a gas hotwater heater roof vent?
YES
Is there a high wind vent cap for a gas furnace roof vent?
Yes you can get a high wind cap for the vent.
Where the vent is located?
The vent is located under the tail feathers. The vent is a dual purpose orifice for waste removal and egg laying.
What type of vent pipe be used to vent a gas water heater through a ceiling and roof?
B-vent pipe.
