0
What else can I help you with?
Minimum distance below sink to trap?
What is the minimum distance between the bottom of a sink and the trap attachment for a bathroom sink
What is the maximum drop to the ground from the bottom of an exterior door?
I don't think there is a "maximum drop" as long as you can put a door shoe on it to keep it air tight. If there is a gap then you will use more energy to cool or heat your home, which means higher bills.
If the vent is below the drain is this an s trap if the drain turns up before the fixture with space between trap?
An S trap would go through the floor. A P trap goes through the wall. As long as the drain is below the bottom of the sink, it should drain. Distance between the bottom of the sink, the trap and the drain does not matter, it just changes how much water stay in the drain. Normally it is just in the trap, but it can be above the trap if circumstances cause the trap to be lower than usual.
How much space should there be between the bottom of a newly installed door and an existing floor?
The real answer is the least amount that still allows the door to swing fully open and still clear all obstacles. OR the same distance as is common with the other doors in the home OR The easy answer is 1/4" to 3/8" for interior doors
What does daylight of a hydraulic press machine mean?
When talking about hydraulic press machines, daylight means that there is a gap between the top and the bottom of the press when the top and bottom come together. This should not happen to ensure that proper pressure is achieved.
What is term for depth of water to float a boat clear of bottom?
The distance between the bottom and the keel of a boat is the draught (British English).
What is the distance between the counter top and the bottom of the wall cabinets?
standard distance between bottom and upper cabinets is 18".
What is the height of a can of soup?
It is the distance between the top of the can and the bottom.
What is the recommended torque specification for a square taper bottom bracket installation?
The recommended torque specification for a square taper bottom bracket installation is typically between 30-50 Nm.
What is the Definition of working distance in microscopy?
The working distance is the distance between the cover slip and the bottom of the housing fo the objective lens.
How many exterior angle in a trapezoid?
There are four exterior angles in a trapezoid, two on the top and two on the bottom.
what is the distance between the top and bottom of a wave in the ocean?
The distance between the top and bottom of a wave in the ocean is called the wave height. Wave height can vary depending on the strength of the wave and environmental factors, but it is typically measured from the trough (bottom) to the crest (top) of the wave.
What is the recommended distance from the floor to the bottom of an interior door?
It will differ depending on what your flooring is. should be somewhere around 1/2" to 1".
Minimum distance below sink to trap?
What is the minimum distance between the bottom of a sink and the trap attachment for a bathroom sink
What should the distance be between the countertop to the bottom of an upper kitchen cabinet?
17-18".
What is the term for the water needed to float a boat clear of the bottom?
The distance between the bottom and the keel of a boat is the draught (British English).
What is a term for the depths of water needed to float a boat clear of the bottom?
The distance between the bottom and the keel of a boat is the draught (British English).
