A short tube on the end of a hose is called a nozzle.
short tube on the end of a hose
The short tube at the end of a hose is commonly referred to as a nozzle. Nozzles can be adjustable or fixed and are used to control the flow and direction of the liquid or gas being expelled from the hose. They are often found on garden hoses, fire hoses, and many other types of hoses for various applications.
A tube connector is the standard fitting that goes on a tube or hose. A tube adapter fits to a tube or hose and enables it to connect to a fitting of a different size to its standard.
A hose is a hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called pipes (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally tubing. The shape of a hose is usually cylindrical (having a circular cross section).
Pipe, duct, conduit, hose, straw...
short tube on the end of a hose
nozzle
What year? On a 2002, take the discharge hose from the condenser apart and you should find it in the hose end.
on my 1986 Grand Am LE it is behind the fuel tank hanging on a clip and should have one hose/tube coming from one end and another hose/tube coming from the other end.
Which hose? I had to replace the high pressure hose on mine. I had to remove the radiator to get to the fitting on the bottom of the pump. Its still a bit tight so I would suggest a short hose/tube wrench. The kind with the slot in the end. I think its around 16mm. You could also take an old box wrench & cut a small slot in the end and cut it short for better access. I also had to order the part. No one had it in stock
The optimal method for measuring water level in a container using a hose is to attach a clear tube to the hose and submerge the open end of the tube into the water. The water level in the container will rise in the tube, allowing you to easily read and measure the height of the water.
This is Just a "Breather Tube". The lower end is connected to a tube on the transmission the upper end just hangs down close to the coolant reservoir.
Quick fix for a leak is black tape. May not last long. Another is same size splice tube that fits inside of broken hose ends to rejoin them and two hose clamps that keep them together. You can also buy either male or female replacement end, clamp it on, and keep on watering in short order.
AnswerShould be in a removable housing at the engine end of the upper radiator hose The thermostat is in a housing at the engine end of the LOWER radiator hose. Remove the air intake tube to access it.
you should find it attached to the radiator & the water pump. if it is missing, that's where you should put the new one. radiator at the front of the vehicle, engine behind it, water pump on front of engine, with hose, or short metal tube coming out of the bottom of it. the radiator will also have a hose or short metal tube coming out of the bottom of it also,(the radiator should also have another hose coming from it at the top)
A tube connector is the standard fitting that goes on a tube or hose. A tube adapter fits to a tube or hose and enables it to connect to a fitting of a different size to its standard.
Yes, provided both end of the tube are open and there are no air bubbles present in the water-filled tube